Connexion
Domaines métrologiques
Raccourcis
Promouvoir et améliorer la comparabilité mondiale des mesures
À propos
Coordination
Liaison
Scientifique
Publications/Réunions
Supplementary comparisons
Final Report
Density of liquids
https://doi.org/10.59161/EWDP4945
Hydrometers calibration
https://doi.org/10.1088/0026-1394/59/1A/07009
Low and medium force measurements
https://doi.org/10.1088/0026-1394/59/1A/07002
Force at 500 kN
https://doi.org/10.1088/0026-1394/58/1A/07001
Comparison of mass standards
Torque measurements
https://doi.org/10.1088/0026-1394/60/1A/07004
Supplementary comparison in Mass, Force: 0.6 MN to 2 MN
https://doi.org/10.1088/0026-1394/53/1A/07020
Force standards
https://doi.org/10.1088/0026-1394/56/1A/07004
Force standard machines
https://doi.org/10.1088/0026-1394/56/1A/07002
Comparison of piston and bell provers
https://doi.org/10.1088/0026-1394/59/1A/07004
Water flow
https://doi.org/10.59161/YMYN7129
Hardness (Rockwell C)
https://doi.org/10.1088/0026-1394/44/1A/07004
Hardness (Rockwell A and B)
https://doi.org/10.1088/0026-1394/46/1A/07015
https://doi.org/10.1088/0026-1394/49/1A/07009
Hardness (Brinell)
https://doi.org/10.1088/0026-1394/59/1A/07019
Hardness (Vickers)
https://doi.org/10.1088/0026-1394/59/1A/07020
Comparison of tensile strength measurements
https://doi.org/10.1088/0026-1394/62/1A/07001
Pressure measurements
https://doi.org/10.1088/0026-1394/45/1A/07003
Pressure measurements in gas media
https://doi.org/10.1088/0026-1394/50/1A/07007
Pressure measurements in gas (gauge mode)
https://doi.org/10.1088/0026-1394/50/1A/07009
Pressure measurements in oil (gauge mode)
https://doi.org/10.1088/0026-1394/53/1A/07004
https://doi.org/10.1088/0026-1394/53/1A/03002
https://doi.org/10.1088/0026-1394/62/1A/07005
https://doi.org/10.1088/0026-1394/54/1A/07017
https://doi.org/10.1088/0026-1394/47/1A/07009
Comparison of national pressure standards
https://doi.org/10.1088/0026-1394/57/1A/07012
Comparison of torque standards in the range from 1 kN·m to 2 kN·m
https://doi.org/10.1088/0026-1394/53/1A/07021
https://doi.org/10.1088/0026-1394/59/1A/07003
Comparison of force standards
https://doi.org/10.1088/0026-1394/62/1A/07004
Water flow and mass rate
https://doi.org/10.1088/0026-1394/61/1A/07008
Measurement of liquid flow rate
https://doi.org/10.1088/0026-1394/57/1A/07023
Reference gas flow meter’s test rigs comparison
https://doi.org/10.1088/0026-1394/50/1A/07012
Comparison of water flow calibration
Liquid volume
https://doi.org/10.1088/0026-1394/57/1A/07013
Gas flow rate measurements
https://doi.org/10.1088/0026-1394/57/1A/07026
Gravitational acceleration
https://doi.org/10.1088/0026-1394/54/1A/07010
Intercomparison in the field of Rockwell and Super-Rockwell hardness scales
https://doi.org/10.1088/0026-1394/46/1A/07001
Comparison of national hardness standards of Superficial-Rockwell scales
Brinell Hardness
https://doi.org/10.1088/0026-1394/57/1A/07003
https://doi.org/10.1088/0026-1394/52/1A/07005
https://doi.org/10.1088/0026-1394/56/1A/07005
Comparison of standards of gauge pressure
https://doi.org/10.1088/0026-1394/61/1A/07002
Pressure measurements (absolute and gauge mode)
https://doi.org/10.1088/0026-1394/57/1A/07008
Gauge pressure
https://doi.org/10.1088/0026-1394/55/1A/07006
https://doi.org/10.1088/0026-1394/54/1A/07009
Measurement of liquids kinematic viscosity
https://doi.org/10.1088/0026-1394/54/1A/07014
Comparison of viscosity measurements of standard liquids
https://doi.org/10.1088/0026-1394/54/1A/07015
https://doi.org/10.1088/0026-1394/53/1A/07006
Density determination of mass standards (Bilateral comparison)
https://doi.org/10.1088/0026-1394/53/1A/07007
Solid density
https://doi.org/10.1088/0026-1394/55/1A/07012
Comparison of deadweight machines
https://doi.org/10.1088/0026-1394/53/1A/07015
Comparison of force measurements in compression
https://doi.org/10.1088/0026-1394/53/1A/07016
Force
https://doi.org/10.1088/0026-1394/58/1A/07004
Gas flow
https://doi.org/10.1088/0026-1394/57/1A/07029
Low air-speed
https://doi.org/10.1088/0026-1394/60/1A/07005
Low Pressure air flow
https://doi.org/10.1088/0026-1394/61/1A/07004
DN100 comparison
https://doi.org/10.1088/0026-1394/59/1A/07010
Calibration and calibration method of a 1000 L proving tank
https://doi.org/10.1088/0026-1394/60/1A/07001
Calibration of piston operated volumetric instruments
https://doi.org/10.59161/SBKA6573
Liquid flow rate
https://doi.org/10.1088/0026-1394/61/1A/07003
Gas flow rate
https://doi.org/10.1088/0026-1394/62/1A/07011
https://doi.org/10.1088/0026-1394/50/1A/07002
Low pressure gas flow rate test facilities
https://doi.org/10.1088/0026-1394/62/1A/07007
https://doi.org/10.1088/0026-1394/62/1A/07025
Comparison of methods and results for the calibration of a 1000 L proving tank
https://doi.org/10.1088/0026-1394/50/1A/07013
Comparison of calibration of 50 ml pycnometer and 500 ml volumetric flasks using the gravimetric method
https://doi.org/10.1088/0026-1394/55/1A/07003
Air speed
https://doi.org/10.1088/0026-1394/54/1A/07021
Free-fall acceleration
https://doi.org/10.1088/0026-1394/47/1A/07008
Hardness Rockwell (HRA, HRB and HRC)
https://doi.org/10.1088/0026-1394/57/1A/07018
https://doi.org/10.1088/0026-1394/58/1A/07003
Comparison of sub-multiples of the kilogram
https://doi.org/10.1088/0026-1394/59/1A/07017
https://doi.org/10.1088/0026-1394/62/1A/07006
https://doi.org/10.59161/GZWD8657
https://doi.org/10.1088/0026-1394/48/1A/07005
https://doi.org/10.1088/0026-1394/54/1A/07020
https://doi.org/10.1088/0026-1394/50/1A/07011
https://doi.org/10.1088/0026-1394/50/1A/07010
https://doi.org/10.1088/0026-1394/53/1A/07002
Sub-milligram mass comparison
https://doi.org/10.1088/0026-1394/54/1A/07023
Calibration of a SRG between 0.005 Pa and 1 Pa, and of a CDG between 0.5 Pa and 100 Pa
https://doi.org/10.1088/0026-1394/48/1A/07014
Hydraulic gauge pressure measurements
https://doi.org/10.1088/0026-1394/49/1A/07007
Negative gauge pressure
Digital pressure gauge comparison in the range of 10 MPa to 100 MPa of liquid pressure
https://doi.org/10.1088/0026-1394/57/1A/07020
Comparison of hydraulic gauge pressure standards from 50 MPa to 1000 MPa
https://doi.org/10.1088/0026-1394/55/1A/07008
Comparison in high gauge pressure
https://doi.org/10.1088/0026-1394/62/1A/07014
Comparison of the determination of hydraulic pressure balance effective area
https://doi.org/10.1088/0026-1394/55/1A/07005
Pressure measurements in gas (absolute mode)
https://doi.org/10.1088/0026-1394/45/1A/07020
Pressure measurements in Nitrogen (absolute mode)
https://doi.org/10.1088/0026-1394/53/1A/07013
https://doi.org/10.1088/0026-1394/47/1A/07007
https://doi.org/10.1088/0026-1394/53/1A/07010
https://doi.org/10.1088/0026-1394/54/1A/07004
https://doi.org/10.1088/0026-1394/47/1A/07010
https://doi.org/10.1088/0026-1394/54/1A/07005
Calibration of torque wrenches
https://doi.org/10.1088/0026-1394/48/1A/07009
https://doi.org/10.1088/0026-1394/62/1A/07013
https://doi.org/10.59161/VJIB3350
Comparison of force standard machines
https://doi.org/10.1088/0026-1394/43/1A/07004
https://doi.org/10.1088/0026-1394/45/1A/07011
Low pressure gas flow (pressure < 4 105 Pa)
https://doi.org/10.1088/0026-1394/45/1A/07012
LDA-based intercomparison of anemometers
https://doi.org/10.1088/0026-1394/50/1A/07005
Measurement of the conventional mass of a weight
https://doi.org/10.1088/0026-1394/51/1A/07006
https://doi.org/10.1088/0026-1394/43/1A/07002
Pressure measurements in the range 30 Pa to 7000 Pa
https://doi.org/10.1088/0026-1394/44/1A/07007
Comparison of absolute pressure standards in the barometric range from 80 kPa to 110 kPa
https://doi.org/10.1088/0026-1394/45/1A/07004
https://doi.org/10.1088/0026-1394/45/1A/07005
Force calibration
https://doi.org/10.1088/0026-1394/57/1A/07006
Force employing deadweight machines
https://doi.org/10.1088/0026-1394/57/1A/07007
Gravimetric calibration of piston pipette
https://doi.org/10.59161/EXCV8150
Mass standards
https://doi.org/10.1088/0026-1394/56/1A/07008
https://doi.org/10.1088/0026-1394/62/1A/07009
Pressure calibration in nitrogen
https://doi.org/10.1088/0026-1394/57/1A/07014
Comparison of the calibration of hydrometers for liquid density determination (bilateral CENAM - INRIM)
https://doi.org/10.1088/0026-1394/46/1A/07006
Comparison of the calibration of hydrometers for liquid density determination (bilateral INMETRO - INRIM)
https://doi.org/10.1088/0026-1394/47/1A/07011
Comparison of volume of solids by hydrostatic weighing (bilateral INMETRO - CENAM)
https://doi.org/10.1088/0026-1394/47/1A/07003
Comparison of calibrations of hydrometers for liquid density determination
https://doi.org/10.1088/0026-1394/54/1A/07022
Determination of volume of weights
https://doi.org/10.1088/0026-1394/55/1A/07011
High-accuracy hydrometers
https://doi.org/10.1088/0026-1394/59/1A/07018
Liquid density using a hydrostatic weighing method
https://doi.org/10.1088/0026-1394/61/1A/07005
Calibration of force testing machines in compression
https://doi.org/10.1088/0026-1394/51/1A/07001
Comparison of force calibration machine in compression
https://doi.org/10.1088/0026-1394/62/1A/07021
Calibration of a force testing machine in compression
https://doi.org/10.1088/0026-1394/62/1A/07019
Comparison of instrumented Charpy tests
https://doi.org/10.1088/0026-1394/59/1A/07008
Calibration of a force transducer in compression
https://doi.org/10.1088/0026-1394/57/1A/07001
Comparison of a force testing machine
https://doi.org/10.1088/0026-1394/53/1A/07022
Force from 10 kN to 100 kN
https://doi.org/10.1088/0026-1394/62/1A/07020
Comparison of liquid volume standards
https://doi.org/10.1088/0026-1394/40/1A/07001
Volume of liquids
https://doi.org/10.1088/0026-1394/55/1A/07009
Calibration of 20 L volumetric pipette
https://doi.org/10.1088/0026-1394/55/1A/07002
Calibration of graduated neck test measures at 20 L
https://doi.org/10.1088/0026-1394/49/1A/07012
https://doi.org/10.1088/0026-1394/53/1A/07014
Flow rate: Water
https://doi.org/10.1088/0026-1394/61/1A/07001
https://doi.org/10.1088/0026-1394/49/1A/07010
Determination of mass of weights
https://doi.org/10.1088/0026-1394/55/1A/07004
https://doi.org/10.1088/0026-1394/59/1A/07007
https://doi.org/10.1088/0026-1394/54/1A/07024
https://doi.org/10.1088/0026-1394/51/1A/07008
Comparison of mass standards of accuracy F1
https://doi.org/10.1088/0026-1394/54/1A/07008
https://doi.org/10.1088/0026-1394/57/1A/07004
https://doi.org/10.1088/0026-1394/62/1A/07010
https://doi.org/10.59161/AYDP5703
https://doi.org/10.1088/0026-1394/48/1A/07004
https://doi.org/10.1088/0026-1394/46/1A/07009
https://doi.org/10.1088/0026-1394/46/1A/07012
https://doi.org/10.1088/0026-1394/59/1A/07001
https://doi.org/10.1088/0026-1394/50/1A/07016
Determination of the susceptibility and magnetic polarization of weights by means of the susceptometer method
https://doi.org/10.1088/0026-1394/53/1A/07012
Pressure measurements (gauge mode)
https://doi.org/10.1088/0026-1394/57/1A/07024
Pressure measurements (low gauge pressure)
https://doi.org/10.1088/0026-1394/48/1A/07012
Pressure measurements (hydraulic gauge pressure)
https://doi.org/10.1088/0026-1394/50/1A/07014
https://doi.org/10.1088/0026-1394/59/1A/07006
Bilateral comparison in torque transducer calibration between CENAM, Mexico and CEM, Spain
https://doi.org/10.1088/0026-1394/59/1A/07014
Torque wrench calibration
https://doi.org/10.1088/0026-1394/57/1A/07015
Comparison of viscosity standards
Kinematic viscosity measurements of standards liquids
https://doi.org/10.1088/0026-1394/62/1A/07017
Nous utilisons des cookies pour optimiser notre site internet. Politique de confidentialité
