Connexion
Domaines métrologiques
Raccourcis
Promouvoir et améliorer la comparabilité mondiale des mesures
À propos
Coordination
Liaison
Scientifique
Publications/Réunions
Supplementary comparisons
Final Report
Determination of roundness in the equator of two alumina spheres
https://doi.org/10.1088/0026-1394/59/1A/04003
Supplementary comparisons of standards in the field of measurement of 3D parameters of surface texture
Depth of v-shaped grooves
https://doi.org/10.1088/0026-1394/57/1A/04001
Depth of V-shaped grooves
Distance measurements using pocket-type laser instruments (EDMs)
https://doi.org/10.1088/0026-1394/54/1A/04004
Involute gear standards
https://doi.org/10.1088/0026-1394/51/1A/04001
High precision roundness measurement by error separation techniques
https://doi.org/10.1088/0026-1394/54/1A/04003
Calibration of gauge blocks by mechanical comparison
https://doi.org/10.1088/0026-1394/54/1A/04002
End standards
Interference units for measurement of tapes up to 20 m
Comparison of parallel thread gauges
https://doi.org/10.1088/0026-1394/52/1A/04003
Laser distance measuring instruments
https://doi.org/10.1088/0026-1394/51/1A/04002
Comparison of profiles of measuring bridges
https://doi.org/10.1088/0026-1394/55/1A/04007
Squareness measurements
https://doi.org/10.1088/0026-1394/47/1A/04008
Comparison of the determination of parameters linked to involute gears
https://doi.org/10.1088/0026-1394/55/1A/04008
https://doi.org/10.1088/0026-1394/47/1A/04007
Comparison of standards in the field of roundness measurements
https://doi.org/10.1088/0026-1394/53/1A/04004
Comparison of standards in the field of surface density of coating measurements and coating thickness
https://doi.org/10.1088/0026-1394/52/1A/04001
Calibration of gauge blocks by comparison
https://doi.org/10.1088/0026-1394/46/1A/04002
Comparison of flatness standards
https://doi.org/10.1088/0026-1394/55/1A/04006
Step height standards
https://doi.org/10.1088/0026-1394/47/1A/04006
https://doi.org/10.1088/0026-1394/43/1A/04001
Comparison of length standards in the range from 0.001 mm to 1 mm
https://doi.org/10.1088/0026-1394/56/1A/04002
Steel tape measurements
Comparison of reference measuring instruments of surface parameters
https://doi.org/10.1088/0026-1394/52/1A/04012
Cylindrical artefacts
https://doi.org/10.1088/0026-1394/45/1A/04002
Surface texture measurements
https://doi.org/10.1088/0026-1394/41/1A/04001
Comparison of length standards for measuring gear parameters
https://doi.org/10.1088/0026-1394/49/1A/04004
https://doi.org/10.1088/0026-1394/42/1A/04001
Stabilized He-Ne/I2 lasers at wavelength 633 nm
https://doi.org/10.1088/0026-1394/52/1A/04002
Comparison of straightness and flatness national standards
https://doi.org/10.1088/0026-1394/47/1A/04002
Flatness of optical flat measured by flatness interferometer
https://doi.org/10.1088/0026-1394/55/1A/04002
Comparison of standards of Length
https://doi.org/10.1088/0026-1394/49/1A/04003
Comparison of step height measurements
https://doi.org/10.1088/0026-1394/58/1A/04003
Comparison of standards of evolvent surface
https://doi.org/10.1088/0026-1394/47/1A/04004
Gauge blocks by mechanical comparison
https://doi.org/10.1088/0026-1394/52/1A/04009
Nano-film thicknesses using X-ray reflectometry
https://doi.org/10.59161/QMOU3486
Comparison on Hand Instruments
Long gauge blocks by comparative method
https://doi.org/10.1088/0026-1394/53/1A/04005
Nano particles measurements
https://doi.org/10.1088/0026-1394/56/1A/04004
Nanometrology: one-dimensional grating pitch calibration by optical diffraction
https://doi.org/10.1088/0026-1394/46/1A/04001
Thread
https://doi.org/10.1088/0026-1394/62/1A/04002
Nanometrology: two-dimensional gratings
https://doi.org/10.1088/0026-1394/45/1A/04003
Geometrical roundness measurements using error separation
https://doi.org/10.1088/0026-1394/53/1A/04002
Comparison of high accuracy gauge block interferometers
https://doi.org/10.1088/0026-1394/48/1A/04002
Nanometrology: line scale standards
https://doi.org/10.1088/0026-1394/40/1A/04002
Gauge block by mechanical comparison
https://doi.org/10.1088/0026-1394/49/1A/04001
https://doi.org/10.1088/0026-1394/52/1A/04010
Nanometric lateral scale
https://doi.org/10.1088/0026-1394/44/1A/04006
Measurement of a 1 mm stage micrometer
https://doi.org/10.1088/0026-1394/61/1A/04003
Calibration of gauge blocks by interferometry
https://doi.org/10.1088/0026-1394/56/1A/04001
Comparison of surface roughness and step height (depth) standards
https://doi.org/10.1088/0026-1394/43/1A/04002
Length of stainless steel tapes
https://doi.org/10.1088/0026-1394/62/1A/04003
Calibration of Pin Gauges
Calibration of Dial Gauge
Calibration of Caliper
Transducer displacement error
Gauge blocks measured by with mechanical probing techniques
https://doi.org/10.59161/ZECS3134
Calibration of Feeler gauges
Calibration of Setting Rods
Calibration of External Micrometer
Nanometrology: step height standards
https://doi.org/10.1088/0026-1394/40/1A/04001
Gauge block calibration by mechanical comparison
Comparison of comparators with photoelectric microscopes
https://doi.org/10.1088/0026-1394/48/1A/04003
https://doi.org/10.1088/0026-1394/60/1A/04001
Nanometrology: one-dimensional gratings
https://doi.org/10.1088/0026-1394/40/1A/04003
Thermal expansion coefficient of gauge blocks
https://doi.org/10.1088/0026-1394/45/1A/04001
Nous utilisons des cookies pour optimiser notre site internet. Politique de confidentialité
