CCM.F-K3.a and CCM.F-K3.b
MEASURAND : Force
NOMINAL VALUE : 500 kN
Degrees of equivalence Di and expanded uncertainty Ui (k = 2) expressed in 10-6
CCM.F-K3.a
MEASURAND : Force
NOMINAL VALUE : 1 MN
Degrees of equivalence Di and expanded uncertainty Ui (k = 2)
expressed in 10-6
CCM.F-K3.a and CCM.F-K3.b
MEASURAND : Force
NOMINAL VALUE : 500 kN
Degrees of equivalence relative to the CCM.F-K3 reference value:
Results are presented under A4 printable format in Summary Results (PDF file).
CCM.F-K3.a
MEASURAND : Force
NOMINAL VALUE : 1 MN
Degrees of equivalence relative to the CCM.F-K3 reference value:
Results are presented under A4 printable format in Summary Results (PDF file).
| Metrology area, Sub-field | Mass and related quantities, Force |
| Description | Force measurements |
| Time of measurements | 2025 - 2026 |
| Status | Measurements in progress |
| References |
Technical Protocol COOMET 912/RU/24 (en) |
| Measurand | Force 50 kN, 100 kN, 500 kN, 1000 kN |
| Parameters | Compression force, temperature (20 ± 1)°C, relative humidity, atmospheric pressure, force application method according to technical protocol |
| Transfer device | Two force transducers: ODS-10 (SN 332112) for 50 kN and 100 kN measurements, and ODS-100 (SN 341672) for 500 kN and 1000 kN measurements, with TC 225.2 measuring amplifiers and Interface CX-0404 calibrator |
| Comparison type | Key Comparison |
| Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
| Conducted by | COOMET (Euro-Asian Cooperation of National Metrological Institutions) |
| RMO Internal Identifier | 912/RU/24 |
| Comments | |
| Pilot institute |
VNIIM
D.I. Mendeleyev Institute for Metrology, Rosstandart Russian Federation |
| Contact person | Ilya Shmigelskiy +7 812 315-15-14 |
| Additional |
| Pilot laboratory | |
|---|---|
| VNIIM |
D.I. Mendeleyev Institute for Metrology, Rosstandart, Russian Federation, COOMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
CCM.F-K3.a and CCM.F-K3.b
MEASURAND : Force
NOMINAL VALUE : 500 kN
|
The key comparison reference value, xR, is calculated as the weighted mean of the corrected measurement results from CCM.F-K3.a and CCM.F-K3.b. Correlations were considered when evaluating the associated standard uncertainty, uR. |
| The degree of equivalence of each laboratory i with respect to the key comparison reference reference value is given by a pair of terms, both expressed in 10-6: Di , where Di is the relative reviation of the final result from xR, and Ui, its expanded uncertainty (k = 2). |
CCM.F-K3.a
MEASURAND : Force
NOMINAL VALUE : 1 MN
|
The key comparison reference value, xR, is calculated as the weighted mean of the corrected measurement results from CCM.F-K3.a. Correlations were considered when evaluating the associated standard uncertainty, uR. |
| The degree of equivalence of each laboratory i with respect to the key comparison reference reference value is given by a pair of terms, both expressed in 10-6: Di , where Di is the relative reviation of the final result from xR, and Ui, its expanded uncertainty (k = 2). |
CCM.F-K3.a and CCM.F-K3.b
MEASURAND : Force
NOMINAL VALUE : 500 kN
CCM.F-K3.a: Two force steps of 500 kN were employed.
CCM.F-K3.b: Two compression force transducers of 500 kN and one force step of 500 kN were emplyed.
Measurements were carried out from 2005 to 2011.
The measurement results for CCM.F-K3.a and CCM.F-K3.b are presented in Section 7 (pp. 6 to 17) of the CCM.F-K3 Final report.
CCM.F-K3.a
MEASURAND : Force
NOMINAL VALUE : 1 MN
CCM.F-K3.a: Two compression force transducers of 1 MN were employed.
Measurements were carried out from 2005 to 2011.
The measurement results for CCM.F-K3.a are presented in Section 7 (pp. 6 to 17) of the CCM.F-K3 Final report.
