Metrology area, Sub-field | Length, Dimensional Metrology |
Description | Interferometric measurement of central length of gauge blocks |
Time of measurements | 2026 - 2027 |
Status | Planned |
References | |
Measurand | Central length (1, 2.5, 3, 3.5, 4, 4.5, 25, 50, 75, 100, 150, 175, 200, 450, 500) mm |
Transfer device | The 10 short gauge blocks (ranging from 1 mm to 100 mm) are primarily drawn from a single set, while the 5 long gauge blocks (with nominal lengths of 150 mm, 175 mm, 200 mm, 450 mm, and 500 mm) originate from a separate set. |
Comparison type | Key Comparison |
Consultative Committee | CCL (Consultative Committee for Length ) |
Conducted by | GULFMET (Gulf Association for Metrology) |
Pilot institute |
SASO-NMCC
National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization Saudi Arabia |
Contact person | Shahad Bin Shuqayr 0533510677 |
Pilot laboratory | |
---|---|
SASO-NMCC |
National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization, Saudi Arabia, GULFMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :