Comparison
Comparison close
Results
Comparison
Comparison close
Results
Comparison
Comparison close
RMO comparison
Linked comparison
EURAMET.T-S7
Metrology area, Sub-field Thermometry, Pyrometry
Description Comparison of measurement parameters required in radiance temperature scale realisation from 156 °C to 1100 °C
Time of measurements 2018 - 2019
Status Planned
References

EURAMET.T-S7 Registration and progress form

EURAMET.T-S7 Technical protocol

Measurand Temperature of fixed-point blackbodies: 156.6 °C, 232 °C, 420 °C, 660 °C, 962 °C and 1084 °C
Parameters Size-of-source effect, gain ratios, calibration using fixed-point blackbody sources, assessment of the effect on the results of changes in the ambient temperature
Transfer device INRIM Transfer Standard radiation thermometer TS1 (the device is based on an InGaAs photodiode with a peak wavelength of nominally 1.6 µm), plus a transportable furnace equipped with a zinc fixed point blackbody source
Comparison type Supplementary Comparison
Consultative Committee CCT (Consultative Committee for Thermometry)
Conducted by EURAMET (European Association of National Metrology Institutes)
RMO Internal Identifier EURAMET Project No 1457
Comments

Pilot institute INRIM
Istituto Nazionale di Ricerca Metrologica
Italy
Contact person F. Girard
f.girard@inrim.it
+39 011 39191
First Name Last Name
wwww@ww.www +356719836 Institute 1 Institute 1 Khmelnitskiy
Pilot laboratory
INRIM

Istituto Nazionale di Ricerca Metrologica, Italy, EURAMET

UME

TÜBITAK Ulusal Metroloji Enstitüsü, Turkey, EURAMET

Comparison
Comparison close
Results
Comparison
Comparison close
Results