Metrology area, Sub-field | Mass and related quantities, Pressure |
Description | Pressure measurements in oil (gauge mode) |
Time of measurements | 1993 - 1995 |
Status | Approved for provisional equivalence |
Final Reports of the comparisons | |
Measurand | Pressure: 50 MPa to 500 MPa |
Transfer device | Pressure balance |
Comparison type | Key Comparison |
Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
Conducted by | EURAMET (European Association of National Metrology Institutes) |
RMO Internal Identifier | EUROMET Project No 45 |
Comments | |
Pilot institute |
LNE
Laboratoire national de métrologie et d'essais France |
Contact person | J. C. Legras +33 (0) 1 40 43 38 08 |
BEV |
Bundesamt für Eich- und Vermessungswesen, Austria, EURAMET |
BNM-LNE |
Bureau National de Métrologie - Laboratoire National d'Essais, France, EURAMET |
CEM |
Centro Español de Metrologia, Spain, EURAMET |
CMA |
Centre for Metrology and Accreditation, Finland, EURAMET |
DFI |
Danish Force Institute, Denmark, EURAMET |
NMi-VSL |
Nederlands Meetinstituut - Van Swinden Laboratorium (became VSL in 2009), Netherlands, EURAMET |
SP/FFA |
Swedish National Testing and Research Institute/Aeronautical Research Institute of Sweden, Sweden, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :