| Metrology area, Sub-field | Length, Dimensional Metrology |
| Description | Calibration of gauge blocks by mechanical comparison |
| Time of measurements | 2017 - 2018 |
| Status | Approved |
| Final Reports of the comparisons | |
| References | |
| Measurand | Central length deviation |
| Transfer device | Steel gauge blocks: 1 mm, 5 mm, 25 mm, 50 mm, 100 mm, 150 mm, 300 mm and 500 mm Tungsten carbide blocks: 1 mm, 5 mm, 25 mm, 50 mm, 100 mm |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCL (Consultative Committee for Length ) |
| Conducted by | GULFMET (Gulf Association for Metrology) |
| Pilot institute |
EMI
Emirates Metrology Institute United Arab Emirates |
| Contact person | Majed Al Senaidi |
| Pilot laboratory | |
|---|---|
| EMI |
Emirates Metrology Institute, United Arab Emirates, GULFMET |
| DPM |
Drejtoria e Pergjithshme e Metrologjise/General Directorate of Metrology, Albania, EURAMET |
| NMIM |
National Metrology Institute of Malaysia, Malaysia, APMP |
| PAI |
Public Authority for industry, Kuwait, GULFMET |
| SASO-NMCC |
National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization, Saudi Arabia, GULFMET |
| UME |
TÜBITAK Ulusal Metroloji Enstitüsü, Türkiye, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
