| Metrology area, Sub-field | Length, Dimensional Metrology |
| Description | Calibration of 1D CMM artefact (step gauge) |
| Time of measurements | 2027 - 2028 |
| Status | Planned |
| Measurand | Inter step spacings: 0 mm to 1020 mm 0 mm to 1020 mm |
| Parameters | Distance between faces, measured along central measuring line |
| Transfer device | 1020 mm Koba step gauge |
| Comparison type | Key Comparison |
| Consultative Committee | CCL (Consultative Committee for Length ) |
| Conducted by | EURAMET (European Association of National Metrology Institutes) |
| Pilot institute |
MIKES
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus Finland |
| Contact person | Antti Lassila +358407678584 |
| Pilot laboratory | |
|---|---|
| MIKES |
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET |
| CEM |
Centro Español de Metrologia, Spain, EURAMET |
| CMI |
Czech Metrology Institute, Czechia, EURAMET |
| DTI |
Danish Technological Institute, Denmark, EURAMET |
| INM |
National Institute of Metrology, Romania, EURAMET |
| INRIM |
Istituto Nazionale di Ricerca Metrologica, Italy, EURAMET |
| LNE |
Laboratoire national de métrologie et d'essais, France, EURAMET |
| METAS |
Federal Institute of Metrology, Switzerland, EURAMET |
| NMISA |
National Metrology Institute of South Africa, South Africa, AFRIMETS |
| NPL |
National Physical Laboratory, United Kingdom, EURAMET |
| RISE |
Research Institutes of Sweden AB, Sweden, EURAMET |
| UME |
TÜBITAK Ulusal Metroloji Enstitüsü, Türkiye, EURAMET |
| VSL |
VSL, Netherlands, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
