| Metrology area, Sub-field | Electricity and Magnetism, High voltage and current |
| Description | AC ratio and phase displacement on voltages up to 100 kV on power frequency |
| Time of measurements | 2026 - 2028 |
| Status | Protocol complete |
| Measurand | Ratio error ε in % Phase displacement Δφ in μrad Nominal ratios 200:1 and 1000:1 |
| Parameters | Input voltage: 20 %, 40 %, 60 %, 80 %, 100 %, and 120 % of nominal input voltage Frequency: 53 Hz or local power frequency Burden: 0 VA and 2.5 VA (resistive) |
| Transfer device | Two voltage transformers, nominal voltages 20 kV and 100 kV |
| Comparison type | Key Comparison |
| Consultative Committee | CCEM (Consultative Committee for Electricity and Magnetism) |
| Conducted by | CCEM (Consultative Committee for Electricity and Magnetism) |
| Pilot institute |
MIKES
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus Finland |
| Contact person | Jari Hällström +358 50 382 2127 |
| Pilot laboratory | |
|---|---|
| MIKES |
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET |
| CMS |
ITRI Center for Measurement Standards, Chinese Taipei, APMP |
| INMETRO |
Instituto Nacional de Metrologia, Qualidade e Tecnologia, Brazil, SIM |
| INTI |
Instituto Nacional de Tecnologia Industrial, Argentina, SIM |
| KRISS |
Korea Research Institute of Standards and Science, Korea, Republic of, APMP |
| NIM |
National Institute of Metrology, China, APMP |
| NMIA |
National Measurement Institute, Australia, Australia, APMP |
| NRC |
National Research Council, Canada, SIM |
| PTB |
Physikalisch-Technische Bundesanstalt, Germany, EURAMET |
| RISE |
Research Institutes of Sweden AB, Sweden, EURAMET |
| SASO-NMCC |
National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization, Saudi Arabia, GULFMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :