Comparison
Comparison close
Results
Comparison
Comparison close
Results
Comparison
Comparison close
RMO comparison
Linked comparison
EURAMET.L-K7.n01
Metrology area, Sub-field Length, Dimensional Metrology
Description Linescales
Time of measurements 2024 - 2026
Status Protocol complete
References

Technical Protocol

EURAMET Project page

Measurand Position deviation of graduation lines from the nominal position related to the 1st (zero) line
Transfer device Linescales: 100 mm, 300 mm and 400 mm
Comparison type Key Comparison
Consultative Committee CCL (Consultative Committee for Length )
Conducted by EURAMET (European Association of National Metrology Institutes)
RMO Internal Identifier EURAMET Project No 1675
Comments Updated version
Pilot institute PTB
Physikalisch-Technische Bundesanstalt
Germany
Contact person Rainer Köning

+495315925251
Additional
First Name Last Name
wwww@ww.www +356719836 Institute 1 Institute 1 Khmelnitskiy
Pilot laboratory
PTB

Physikalisch-Technische Bundesanstalt, Germany, EURAMET

BEV

Bundesamt für Eich- und Vermessungswesen, Austria, EURAMET

BFKH

Government Office of the Capital City Budapest, Hungary, EURAMET

BIM

Bulgarian Institute of Metrology, Bulgaria, EURAMET

CEM

Centro Español de Metrologia, Spain, EURAMET

CENAM

Centro Nacional de Metrologia, Mexico, SIM

CMI

Czech Metrology Institute, Czechia, EURAMET

DMDM

Directorate of Measures and Precious Metals, Serbia, EURAMET

EIM

Hellenic Institute of Metrology, Greece, EURAMET

FSB-LPMD

FSB - Laboratory for precise measurement of length, Croatia, EURAMET

GUM

Glowny Urzad Miar, Central Office of Measures, Poland, EURAMET

INM

National Institute of Metrology, Romania, EURAMET

KRISS

Korea Research Institute of Standards and Science, Korea, Republic of, APMP

KazStandard

Kazakhstan Institute of Standardization and Metrology, Kazakhstan, COOMET

LNE

Laboratoire national de métrologie et d'essais, France, EURAMET

METAS

Federal Institute of Metrology, Switzerland, EURAMET

MIKES

VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET

MIRS/UM-FS/LTM

MIRS/University of Maribor, Faculty for Mechanical Engineering/Laboratory for Production Management, Slovenia, EURAMET

NIM

National Institute of Metrology, China, APMP

NIST

National Institute of Standards and Technology, United States, SIM

NMIA

National Measurement Institute, Australia, Australia, APMP

NMIM

National Metrology Institute of Malaysia, Malaysia, APMP

NPL

National Physical Laboratory, United Kingdom, EURAMET

NPLI

CSIR National Physical Laboratory of India, India, APMP

NSAI NML

NSAI National Metrology Laboratory, Ireland, EURAMET

NSC IM

National Scientific Centre "Institute of Metrology", Ukraine, EURAMET

SASO-NMCC

National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization, Saudi Arabia, GULFMET

SMU

Slovensky Metrologicky Ustav, Slovakia, EURAMET

SNSU-BSN

National Measurement Standard - National Standardization Agency of Indonesia, Indonesia, APMP

UME

TÜBITAK Ulusal Metroloji Enstitüsü, Türkiye, EURAMET

VSL

VSL, Netherlands, EURAMET

Comparison
Comparison close
Results
Comparison
Comparison close
Results