| Metrology area, Sub-field | Length, Dimensional Metrology |
| Description | Depth of V-shaped grooves |
| Time of measurements | 2021 |
| Status | Approved |
| Final Reports of the comparisons | |
| Measurand | Depth of v-grooves Nominal values in mm: 0.005, 0.02, 0.05, 0.2, 0.6 and 0.9 |
| Parameters | Measurements carried out according to ISO 5436-1 |
| Transfer device | Depth setting standard. The PTB nickel depth setting standard is used as reference standard. |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCL (Consultative Committee for Length ) |
| Conducted by | EURAMET (European Association of National Metrology Institutes) |
| RMO Internal Identifier | EURAMET Project No 1534 |
| Pilot institute |
MIKES
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus Finland |
| Contact person | Antti Lassila +358407678584 |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
