Comparison
Comparison close
Results
Comparison
Comparison close
Results
Comparison
Comparison close
RMO comparison
Linked comparison
APMP.L-K8.n01
Metrology area, Sub-field Length, Dimensional Metrology
Description Calibration of surface roughness standards
Time of measurements 2021 - 2023
Status Measurements in progress
References

 APMP.L-K8.n01 Technical Protocol

Measurand Groove depths and Parameters Ra, Rq, Rz, Rt, RSm
Transfer device Surface texture standards
Comparison type Key Comparison
Consultative Committee CCL (Consultative Committee for Length )
Conducted by APMP (Asia Pacific Metrology Programme)
RMO Internal Identifier APMP.L-K8
Comments Final mid-cycle check suggests good stability. By September 2024, 17 laboratories will have completed measurements with Russia and NZ remaining. It is now anticipated to have the draft A report ready around February 2025 (which will be about 24 months later than the original schedule).
Pilot institute NMIA
National Measurement Institute, Australia
Australia
Contact person Andrew BAKER

+61 3 9644 4902
First Name Last Name
wwww@ww.www +356719836 Institute 1 Institute 1 Khmelnitskiy
Pilot laboratory
NMIA

National Measurement Institute, Australia, Australia, APMP

CENAM

Centro Nacional de Metrologia, Mexico, SIM

CMS

ITRI Center for Measurement Standards, Chinese Taipei, APMP

INTI

Instituto Nacional de Tecnologia Industrial, Argentina, SIM

KRISS

Korea Research Institute of Standards and Science, Korea, Republic of, APMP

MSL

Measurement Standards Laboratory, New Zealand, APMP

NIM

National Institute of Metrology, China, APMP

NIMT

National Institute of Metrology (Thailand), Thailand, APMP

NIST

National Institute of Standards and Technology, United States, SIM

NMC, A*STAR

National Metrology Centre, Agency for Science, Technology and Research, Singapore, APMP

NMIJ AIST

National Metrology Institute of Japan, Japan, APMP

NMIM

National Metrology Institute of Malaysia, Malaysia, APMP

NPL

National Physical Laboratory, United Kingdom, EURAMET

NPLI

CSIR National Physical Laboratory of India, India, APMP

SASO-NMCC

National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization, Saudi Arabia, GULFMET

SCL

Standards and Calibration Laboratory, Hong Kong, China, APMP

SNSU-BSN

National Measurement Standard - National Standardization Agency of Indonesia, Indonesia, APMP

UzNIM

Uzbek National Institute of Metrology, Uzbekistan, COOMET

VNIIMS (now RCAM-Rostest)

Russian Scientific Research Institute for Metrological Service, Rosstandart (now Research Center for Applied Metrology - Rostest), Russian Federation, COOMET

Comparison
Comparison close
Results
Comparison
Comparison close
Results