| Metrology area, Sub-field | Acoustics, Ultrasound, Vibration, Vibration |
| Description | Secondary calibration of accelerometers following ISO 16063-21:2003 |
| Time of measurements | 2019 - 2021 |
| Status | Approved |
| Final Reports of the comparisons | |
| References | |
| Measurand | Accelerometer sensitivity magnitude in pC/(m/s2) Phase in 1° Nominal magnitude at 160 Hz: 0.13 pC/(m/s2) to 1 pC/(m/s2) Nominal phase at 160 Hz: -0.7° to 0° |
| Parameters | Frequency range: from 10 Hz to 10 kHz Acceleration amplitude: admissible from 2 m/s2 to 200 m/s2 |
| Transfer device | Brϋel & Kjær 8305-001 (SN: 2423435) "single ended" (SE) type Brϋel & Kjær 4371V (SN: 2046745) "single ended" (SE) type Endevco 2270 (SN: 16198) "single ended" (SE) type |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCAUV (Consultative Committee for Acoustics, Ultrasound and Vibration) |
| Conducted by | EURAMET (European Association of National Metrology Institutes) |
| RMO Internal Identifier | EURAMET Project 1481 |
| Pilot institute |
BEV
Bundesamt für Eich- und Vermessungswesen Austria |
| Contact person | Peter Rosenkranz +43121110826515 |
| Pilot laboratory | |
|---|---|
| BEV |
Bundesamt für Eich- und Vermessungswesen, Austria, EURAMET |
| BIM |
Bulgarian Institute of Metrology, Bulgaria, EURAMET |
| CMI |
Czech Metrology Institute, Czechia, EURAMET |
| IPQ |
Instituto Portugues da Qualidade, Portugal, EURAMET |
| KEBS |
Kenya Bureau of Standards, Kenya, AFRIMETS |
| METAS |
Federal Institute of Metrology, Switzerland, EURAMET |
| MIKES |
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
