Comparison Display

Comparison

Comparison close

EURAMET.L-S12

Metrology area, Sub-field	Length, Dimensional Metrology
Description	Calibration of gauge blocks by mechanical comparison
Time of measurements	2001 - 2002
Status	Approved

Final Reports of the comparisons	EURAMET.L-S12 Final Report, 2008, 31 pages Metrologia, 2008, 45, Tech. Suppl., 04002
Measurand	Length
Transfer device	8 steel gauge blocks up to 100 mm

Comparison type	Supplementary Comparison
Consultative Committee	CCL (Consultative Committee for Length )
Conducted by	EURAMET (European Association of National Metrology Institutes)
RMO Internal Identifier	EUROMET Project No 601
Comments
Pilot institute	NML(IE) National Metrology Laboratory of Ireland; now NSAI National Metrology Laboratory, NSAI NML Ireland
Contact person	Howard McQuoid +353 (0) 1 808 2657

Pilot laboratory
NML(IE)	National Metrology Laboratory of Ireland; now NSAI National Metrology Laboratory, NSAI NML, Ireland, EURAMET

BEV	Bundesamt für Eich- und Vermessungswesen, Austria, EURAMET

CMI	Czech Metrology Institute, Czechia, EURAMET

EIM	Hellenic Institute of Metrology, Greece, EURAMET

GUM	Glowny Urzad Miar, Central Office of Measures, Poland, EURAMET

MIKES

VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET

MIRS	Metrology Institute of the Republic of Slovenia, Ministry of the Economy, Tourism and Sport, Slovenia, EURAMET

NCM	National Centre of Metrology, now BIM (Bulgarian Institute of Metrology), Bulgaria, EURAMET

NPL	National Physical Laboratory, United Kingdom, EURAMET

OMH	Országos Mérésügyi Hivatal; Subsequently MKEH, now BKFH, Hungary, EURAMET

UME	TÜBITAK Ulusal Metroloji Enstitüsü, Türkiye, EURAMET

VMT/VMC

State Metrology Service / Vilnius Metrology Center, now Vilnius Metrology Center/VI Vilniaus metrologijos centras, VMC, Lithuania, EURAMET

Key and supplementary comparisons - Print out