| Metrology area, Sub-field | Mass and related quantities, Density |
| Description | Comparison of calibrations of hydrometers for liquid density determination |
| Time of measurements | 2012 |
| Status | Approved |
| Final Reports of the comparisons | |
| References | |
| Measurand | Four hydrometers in three different nominal values each Density: 0.6010 g/cm3, 0.6050 g/cm3, 0.6090 g/cm3 1.0 % vol, 5.0 % vol, 9.0 % vol 1.4910 g/cm3, 1.4950 g/cm3, 1.4990 g/cm3 1.9810 g/cm3, 1.9900 g/cm3, 1.9990 g/cm3 |
| Transfer device | Four hydrometers |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
| Conducted by | SIM (Inter-American Metrology System) |
| Comments | |
| Pilot institute |
INDECOPI
Instituto Nacional de Defensa de la Competencia y de la Protección de la Propiedad Intelectual Peru |
| Contact person | Abed MORALES +51 1 224 7800 Ext. 1661 |
| Pilot laboratory | |
|---|---|
| INDECOPI |
Instituto Nacional de Defensa de la Competencia y de la Protección de la Propiedad Intelectual, Peru, SIM |
| CENAM |
Centro Nacional de Metrologia, Mexico, SIM |
| IBMETRO |
Instituto Boliviano de Metrología, Bolivia, SIM |
| INEN |
Servicio Ecuatoriano de Normalización, Ecuador, SIM |
| INTN |
Instituto Nacional de Tecnologia y Normalizacion, Paraguay, SIM |
| LACOMET |
Laboratorio Costarricense de Metrologia, Costa Rica, SIM |
| SIC |
Superintendencia de Industria y Comercio, Colombia, SIM |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
