| Metrology area, Sub-field | Length, Dimensional Metrology |
| Description | Gauge blocks by mechanical comparison |
| Time of measurements | 2008 - 2011 |
| Status | Approved |
| Final Reports of the comparisons | |
| Measurand | Central length: 1 mm to 100 mm |
| Transfer device | Steel and ceramic gauge blocks |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCL (Consultative Committee for Length ) |
| Conducted by | SIM (Inter-American Metrology System) |
| Comments | |
| Pilot institute |
CENAM
Centro Nacional de Metrologia Mexico |
| Contact person | Carlos Colin Castellanos +52 442 211 05 00 |
| Pilot laboratory | |
|---|---|
| CENAM |
Centro Nacional de Metrologia, Mexico, SIM |
| BSJ |
Bureau of Standards Jamaica, Jamaica, SIM |
| CENAMEP AIP |
Centro Nacional de Metrología de Panama AIP, Panama, SIM |
| CMI |
Czech Metrology Institute, Czechia, EURAMET |
| DICTUC S.A. |
Laboratorio Custodio de Patrones Nacionales de Longitud, Pontificia Universidad Católica de Chile, Chile, SIM |
| IBMETRO |
Instituto Boliviano de Metrología, Bolivia, SIM |
| INDECOPI |
Instituto Nacional de Defensa de la Competencia y de la Protección de la Propiedad Intelectual, Peru, SIM |
| INEN |
Servicio Ecuatoriano de Normalización, Ecuador, SIM |
| INMETRO |
Instituto Nacional de Metrologia, Qualidade e Tecnologia, Brazil, SIM |
| INTI |
Instituto Nacional de Tecnologia Industrial, Argentina, SIM |
| LACOMET |
Laboratorio Costarricense de Metrologia, Costa Rica, SIM |
| LATU |
Laboratorio Tecnologico del Uruguay, Uruguay, SIM |
| NIST |
National Institute of Standards and Technology, United States, SIM |
| NPLI |
CSIR National Physical Laboratory of India, India, APMP |
| SIC |
Superintendencia de Industria y Comercio, Colombia, SIM |
| TTBS |
Trinidad and Tobago Bureau of Standards (Trinidad and Tobago/CARICOM), CARICOM (Caribbean Community), SIM |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
