| Metrology area, Sub-field | Mass and related quantities, Pressure |
| Description | Pressure measurements in Nitrogen (absolute mode) |
| Time of measurements | 2008 - 2010 |
| Status | Approved |
| Final Reports of the comparisons | |
| Measurand | Pressure: 100 µPa to 0.9 Pa |
| Transfer device | Two spinning rotor gauges and a control electronic |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
| Conducted by | EURAMET (European Association of National Metrology Institutes) |
| RMO Internal Identifier | EURAMET Project No 1040 |
| Comments | |
| Pilot institute |
METAS
Federal Institute of Metrology Switzerland |
| Contact person | C. Wüthrich +41 (0) 31 32 33 423 |
| Pilot laboratory | |
|---|---|
| METAS |
Federal Institute of Metrology, Switzerland, EURAMET |
| CMI |
Czech Metrology Institute, Czechia, EURAMET |
| EIM |
Hellenic Institute of Metrology, Greece, EURAMET |
| IMBIH |
Institute of Metrology of Bosnia and Herzegovina, Bosnia and Herzegovina, EURAMET |
| INRIM |
Istituto Nazionale di Ricerca Metrologica, Italy, EURAMET |
| MIKES |
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET |
| MIRS/IMT/LMT |
MIRS/Institute of Metals and Technology/Laboratory of Pressure Metrology, Slovenia, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
