| Metrology area, Sub-field | Length, Dimensional Metrology |
| Description | Calibration of a linescale |
| Time of measurements | 2015 - 2017 |
| Status | Approved |
| Final Reports of the comparisons | |
| References | |
| Measurand | Distance between the center line position of the reference line and the center line position of the measured line. |
| Transfer device | Line scale |
| Comparison type | Key Comparison |
| Consultative Committee | CCL (Consultative Committee for Length ) |
| Conducted by | APMP (Asia Pacific Metrology Programme) |
| Pilot institute |
KRISS
Korea Research Institute of Standards and Science Korea, Republic of |
| Contact person | Tae Bong Eom +82 42 868 5100 |
| Pilot laboratory | |
|---|---|
| KRISS |
Korea Research Institute of Standards and Science, Korea, Republic of, APMP |
| CMS |
ITRI Center for Measurement Standards, Chinese Taipei, APMP |
| INMETRO |
Instituto Nacional de Metrologia, Qualidade e Tecnologia, Brazil, SIM |
| LATU |
Laboratorio Tecnologico del Uruguay, Uruguay, SIM |
| LNE |
Laboratoire national de métrologie et d'essais, France, EURAMET |
| NIM |
National Institute of Metrology, China, APMP |
| NIMT |
National Institute of Metrology (Thailand), Thailand, APMP |
| NMC, A*STAR |
National Metrology Centre, Agency for Science, Technology and Research, Singapore, APMP |
| NMIA |
National Measurement Institute, Australia, Australia, APMP |
| NMIJ AIST |
National Metrology Institute of Japan, Japan, APMP |
| NMISA |
National Metrology Institute of South Africa, South Africa, AFRIMETS |
| NSCL |
National Standards and Calibration Laboratory, Syrian Arab Republic, APMP |
| RISE |
Research Institutes of Sweden AB, Sweden, EURAMET |
| SCL |
Standards and Calibration Laboratory, Hong Kong, China, APMP |
| VMI-STAMEQ |
Viet Nam Metrology Institute, Directorate for Standards and Quality, Viet Nam, APMP |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
