Metrology area, Sub-field | Mass and related quantities, Pressure |
Description | Comparison of hydraulic gauge pressure standards from 50 MPa to 1000 MPa |
Time of measurements | 2014 |
Status | Approved |
Final Reports of the comparisons | |
References | |
Measurand | Gauge pressure at nominal values: 50 MPa, 100 MPa, 150 MPa, 200 MPa, 250 MPa, 300 MPa, 350 MPa, 400 MPa, 450 MPa, 500 MPa, 600 MPa, 700 MPa, 800 MPa, 900 MPa, and 1000 MPa |
Transfer device | Set of eight pressure transducers (manufacturer: HBM and WIKA) |
Comparison type | Supplementary Comparison |
Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
Conducted by | EURAMET (European Association of National Metrology Institutes) |
RMO Internal Identifier | EURAMET Project No 1306 |
Comments |
|
Pilot institute |
PTB
Physikalisch-Technische Bundesanstalt Germany |
Contact person | J. Konemann +49 531 592 3331 |
Pilot laboratory | |
---|---|
PTB |
Physikalisch-Technische Bundesanstalt, Germany, EURAMET |
CMI |
Czech Metrology Institute, Czechia, EURAMET |
LNE |
Laboratoire national de métrologie et d'essais, France, EURAMET |
METAS |
Federal Institute of Metrology, Switzerland, EURAMET |
SMU |
Slovensky Metrologicky Ustav, Slovakia, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :