| Metrology area, Sub-field | Length, Dimensional Metrology |
| Description | Length of stainless steel tapes |
| Time of measurements | 2018 - 2021 |
| Status | Approved |
| Final Reports of the comparisons | |
| References | |
| Measurand | Length 10 m and 50 m |
| Transfer device | Three stainless steel tapes (PTB) |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCL (Consultative Committee for Length ) |
| Conducted by | EURAMET (European Association of National Metrology Institutes) |
| RMO Internal Identifier | EURAMET Project No 1433 |
| Comments | EURAMET TC-L and CCL WG-MRA approved final report |
| Pilot institute |
PTB
Physikalisch-Technische Bundesanstalt Germany |
| Contact person | Florian Pollinger +49 531 592 5420 |
| Pilot laboratory | |
|---|---|
| PTB |
Physikalisch-Technische Bundesanstalt, Germany, EURAMET |
| AS METROSERT |
Central Office of Metrology, Estonia, EURAMET |
| BEV |
Bundesamt für Eich- und Vermessungswesen, Austria, EURAMET |
| BFKH |
Government Office of the Capital City Budapest, Hungary, EURAMET |
| BIM |
Bulgarian Institute of Metrology, Bulgaria, EURAMET |
| BMM |
Bureau of Metrology (Montenegro), Montenegro, EURAMET |
| CEM |
Centro Español de Metrologia, Spain, EURAMET |
| CMS |
ITRI Center for Measurement Standards, Chinese Taipei, APMP |
| GUM |
Glowny Urzad Miar, Central Office of Measures, Poland, EURAMET |
| INTI |
Instituto Nacional de Tecnologia Industrial, Argentina, SIM |
| IPQ |
Instituto Portugues da Qualidade, Portugal, EURAMET |
| JV |
Justervesenet, Norway, EURAMET |
| LATMB |
LNMC Metrology Bureau (LATMB), Latvia, EURAMET |
| MASM |
Mongolian Agency for Standardization and Metrology, Mongolia, APMP |
| MIRS/UM-FS/LTM |
MIRS/University of Maribor, Faculty for Mechanical Engineering/Laboratory for Production Management, Slovenia, EURAMET |
| NIM |
National Institute of Metrology, China, APMP |
| RISE |
Research Institutes of Sweden AB, Sweden, EURAMET |
| SASO-NMCC |
National Measurement and Calibration Center - Saudi Standards, Metrology and Quality Organization, Saudi Arabia, GULFMET |
| SMD |
Service de la Métrologie Belge, Belgium, EURAMET |
| UME |
TÜBITAK Ulusal Metroloji Enstitüsü, Türkiye, EURAMET |
| VUGTK/RIGTC |
Research Institute of Geodesy, Topography and Cartography, Czechia, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
