| Metrology area, Sub-field | Mass and related quantities, Fluid Flow |
| Description | Comparison of primary standards for micro flow rates |
| Time of measurements | 2012 - 2015 |
| Status | Abandoned |
| References | |
| Measurand | For the Syringe pump: 2 µl/min, 10 µl/min, 33 µl/min, 100 µl/min and 333 µl/min For the Coriolis type flow meter: 0.5 g/h, 6 g/h, 20 g/h, 60 g/h, and 200 g/h |
| Transfer device | One Syringe pump and one Coriolis type flow meter |
| Comparison type | Supplementary Comparison |
| Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
| Conducted by | EURAMET (European Association of National Metrology Institutes) |
| RMO Internal Identifier | EURAMET Project No 1291 |
| Comments | This comparsion was archived on 25 October 2016 on request from the CCM WG on Fluid Flow. |
| Pilot institute |
VSL
VSL Netherlands |
| Contact person | P. Lucas +31 15 269 1538 |
| Pilot laboratory | |
|---|---|
| VSL |
VSL, Netherlands, EURAMET |
| DTI |
Danish Technological Institute, Denmark, EURAMET |
| IPQ |
Instituto Portugues da Qualidade, Portugal, EURAMET |
| LNE-CETIAT |
Centre Technique des Industries Aérauliques et Thermiques, France, EURAMET |
| METAS |
Federal Institute of Metrology, Switzerland, EURAMET |
| MIKES |
VTT Technical Research Centre of Finland Ltd, Centre for Metrology/Mittatekniikan keskus, Finland, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
