Results for: Sri Lanka
Filters
CMC Quick search Filters close;
?
Added keywords act as an additional filter. Keywords separated by a space will be treated by the logical function AND automatically. You may also use OR. Keyword searches also find close matches. Placing quotation marks (") before and after the search word, e.g. "word", will allow for exact matches.

In case of multiple search, please use ADVANCED SEARCH.
2 results
Reset all
CMC Area
To filter, either use the tick boxes or click on the underscored item
General physics
Geographical location
In the CMCs uncertainty statements, the notation Q[a, b] stands for the root-sum-square of the terms between brackets: Q[a, b] = [a 2 + b 2]1/2
Unless otherwise stated the expanded uncertainties given below correspond to k = 2 (at a 95 % level of confidence)
Sri Lanka, MUSSD (Department of Measurement Units, Standards and Services)
Pressure , Gauge pressure: gas medium : 500 kPa to 7000 kPa
Instruments for pneumatic pressure measurement
Absolute expanded uncertainty : 5.6E1 Pa to 3.4E2 Pa
Q[50 , 0.000048] = [(50 Pa)+ (0.000048*P )]1/2 P = Gauge Pressure in Pa
The Uncertainty is expressed in Pa
Pressure balance
DKD-R 6-1 “Calibration of pressure gauges”, Edition 03/2014
MUSSD, National Metrology Institute of Sri Lanka
Approved on 01 July 2022
Institute service identifier : PR-3.2.1
Pressure , Gauge pressure: liquid medium : 0.5 MPa to 200 MPa
Instruments for hydraulic pressure measurement
Absolute expanded uncertainty : 0.12 kPa to 1.2E1 kPa
Q [0.12 , 0.000062] = [ (0.12 kPa)2 + (0.000062*P)2] 1/2 P= Hydraulic gauge Pressure in kPa
The uncertainty is expressed in kPa
Pressure balance
DKD-R 6-1 “Calibration of pressure gauges”, Edition 03/2014
MUSSD, National Metrology Institute of Sri Lanka
Approved on 01 July 2022
Institute service identifier : PR-3.2.2

Select Metrology Area

General physics
Acoustics, Ultrasound, Vibration

This metrology area covers the fields of acoustics, ultrasound and vibration.

Electricity and Magnetism

This metrology area covers the fields of DC and AC measurements, impedance, electric and magnetic fields, radiofrequencies and measurements on materials.

Length

This metrology area covers the fields of laser frequencies and dimensional metrology.

Mass and related quantities

This metrology area covers the fields of mass standards, force, pressure, density, hardness, torque, gravity and viscosity.

Chemistry and Biology
Chemistry and Biology

This metrology area covers all fields relevant to chemistry and biology.

Ionizing radiation
Ionizing Radiation

This metrology area covers the fields of dosimetry, radioactivity and neutron measurements.