Results for: India
Filters
CMC Quick search Filters close;
?
Added keywords act as an additional filter. Keywords separated by a space will be treated by the logical function AND automatically. You may also use OR. Keyword searches also find close matches. Placing quotation marks (") before and after the search word, e.g. "word", will allow for exact matches.

In case of multiple search, please use ADVANCED SEARCH.
98 results
Reset all
In the CMCs uncertainty statements, the notation Q[a, b] stands for the root-sum-square of the terms between brackets: Q[a, b] = [a 2 + b 2]1/2
Unless otherwise stated the expanded uncertainties given below correspond to k = 2 (at a 95 % level of confidence)
India, BARC (Bhabha Atomic Research Centre)
Ionizing radiation
Activity , Single nuclide solution : 1.80E5 Bq to 6.00E7 Bq
Relative expanded uncertainty 2 %
High pressure well type ionization chamber
Fe-59, 1 g in Injection Glass Vial or 3.6 g in NIST ampoule
Reference standard : 4πβγ-coincidence counting
Source of traceability : BARC
Approved on 27 November 2025
Institute service identifier : APM-RAD-BARC-2005
CMC ID : APMP-RI-IN-00000PQJ-1
 
Ionizing radiation
Kerma/rate , Protection level ionization chamber : 0.6 mGy/h to 300 mGy/h
Relative expanded uncertainty 2 %
Calibration in air against primary standard (Free Air Chamber), free in air
X-ray, 50 kV to 300 kV, Wide Spectrum, 80 kV to 200 kV at 2.0 m
Reference standard : Free Air Ionization Chamber
Source of traceability : BARC
Approved on 09 April 2026
Institute service identifier : APM-RAD-BARC-1018
CMC ID : APMP-RI-IN-00000PF5-1
 
Ionizing radiation
Activity , Single nuclide solution : 3.70E5 Bq to 3.70E7 Bq
Relative expanded uncertainty 2.2 %
4πβγ-coincidence counting, balance
Ge-68/Ga-68, 1 g of radioactive solution in a glass ampoule
Reference standard : 4πβγ-coincidence counting, standard set of weights
Source of traceability : BARC
Approved on 19 December 2025
Institute service identifier : APM-RAD-BARC-2029
CMC ID : APMP-RI-IN-00000PR7-1
 
Ionizing radiation
Activity , Single nuclide solution : 6.90E4 Bq to 2.30E7 Bq
Relative expanded uncertainty 1 %
4πβγ-coincidence counting, balance
Co-60, 1 g of radioactive solution in a glass ampoule
Reference standard : 4πβγ-coincidence counting, standard set of weights
Source of traceability : BARC
Approved on 22 December 2025
Institute service identifier : APM-RAD-BARC-2026
CMC ID : APMP-RI-IN-00000PR5-1
 
Ionizing radiation
Activity , Single nuclide, solid source : 3700 Bq to 4.00E5 Bq
Relative expanded uncertainty 5 %
HPGe gamma spectrometer
Co-60, Small point source covered with thin plastic window. Active area < 5mm diameter
Reference standard : 4πβγ-coincidence counting
Source of traceability : BARC
Approved on 27 November 2025
Institute service identifier : APM-RAD-BARC-2019
CMC ID : APMP-RI-IN-00000PQY-1
 
Ionizing radiation
Activity , Single nuclide solution : 6.90E4 Bq to 2.30E7 Bq
Relative expanded uncertainty 2 %
High pressure well type ionization chamber
Co-60, 1 g in Injection Glass Vial or 3.6 g in NIST ampoule
Reference standard : 4πβγ-coincidence counting
Source of traceability : BARC
Approved on 27 November 2025
Institute service identifier : APM-RAD-BARC-2003
CMC ID : APMP-RI-IN-00000PQH-1
 
Ionizing radiation
Activity , Single nuclide solution : 1.80E5 Bq to 6.00E7 Bq
Relative expanded uncertainty 1.1 %
4πβγ-coincidence counting, balance
Fe-59, 1 g of radioactive solution in a glass ampoule
Reference standard : 4πβγ-coincidence counting, standard set of weights
Source of traceability : BARC
Approved on 19 December 2025
Institute service identifier : APM-RAD-BARC-2028
CMC ID : APMP-RI-IN-00000PQS-1
 
Ionizing radiation
Absorbed dose/rate , Radiotherapy ionization chamber : 0.0184 Gy/s to 0.0257 Gy/s
Relative expanded uncertainty 1.5 %
Calibration in water phantom by substitution with secondary standard dosimeter
Co-60, 266 TBq (2017), 10 cm x 10 cm field at 80 cm SSD with dosimeter at 5 cm/ 10 cm depth
Reference standard : Secondary standard ionisation chamber FC65G
Source of traceability : BIPM
Approved on 19 February 2026
Institute service identifier : APM-RAD-BARC-1001
CMC ID : APMP-RI-IN-00000PDY-1
 
Ionizing radiation
Kerma/rate , Radiotherapy ionization chamber : 2.50E-3 Gy/s to 0.0186 Gy/s
Relative expanded uncertainty 1.2 %
Calibration in air by substitution with secondary standard dosimeter
Co-60, 266 TBq (2017) Co-60, at 1 m distance
Reference standard : Secondary standard ionisation chamber FC65G
Source of traceability : BIPM
Approved on 19 February 2026
Institute service identifier : APM-RAD-BARC-1002
CMC ID : APMP-RI-IN-00000PE8-1
 
Ionizing radiation
Kerma/rate , Protection level ionization chamber : 0.04 mGy/h to 100 mGy/h
Relative expanded uncertainty 2 %
Calibration in air against primary standard (Free Air Chamber), free in air
X-ray, 50 kV to 300 kV, Narrow Spectrum, 60 kV to 300 kV, 1.0 m to 2.0 m
Reference standard : Free Air Ionization Chamber
Source of traceability : BARC
Approved on 19 February 2026
Institute service identifier : APM-RAD-BARC-1017
CMC ID : APMP-RI-IN-00000PF4-1
 
Ionizing radiation
Activity , Single nuclide, solid source : 3700 Bq to 4.00E5 Bq
Relative expanded uncertainty 5 %
HPGe gamma spectrometer
Fe-59, Small point source covered with thin plastic window. Active area < 5mm diameter
Reference standard : 4πβγ-coincidence counting
Source of traceability : BARC
Approved on 27 November 2025
Institute service identifier : APM-RAD-BARC-2021
CMC ID : APMP-RI-IN-00000PR0-1
 
India, NPLI (CSIR National Physical Laboratory of India)
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in % Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in %
synthetic air carbon dioxide 50 to 5.00E5 1 50 to 5.00E5 1
  • Mechanism for measurement service delivery : Primary reference gas mixtures as Gas-BNDs are disseminated to customers on demand.
  • BND, i.e. Bharatiya Nirdeshak Dravya (Indian Reference Material) used for CRM.
  • Approved on 23 July 2025
  • Institute service identifier : NPLI/BND 6000
  • CMC ID : APMP-QM-IN-00000Q92-1
     
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in % Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in %
nitrogen carbon dioxide 250 to 2.00E5 0.3 250 to 2.00E5 0.3
  • Mechanism for measurement service delivery : Primary reference gas mixtures as Gas-BNDs are disseminated to customers on demand.
  • BND, i.e. Bharatiya Nirdeshak Dravya (Indian Reference Material) is used for CRM
  • Approved on 18 June 2025
  • Institute service identifier : NPLI/BND 6000
  • CMC ID : APMP-QM-IN-00000Q93-1
     
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in % Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in %
nitrogen carbon monoxide 50 to 2.00E4 4 50 to 2.00E4 4
  • Mechanism for measurement service delivery : Primary reference gas mixtures as Gas-BNDs are disseminated to customers on demand.
  • BND, i.e. Bharatiya Nirdeshak Dravya (Indian Reference Material) is used for CRM
  • Approved on 18 June 2025
  • Institute service identifier : NPLI/BND 6000
  • CMC ID : APMP-QM-IN-00000Q95-1
     
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in % Amount -of-substance fraction in µmol/mol Relative expanded uncertainty in %
nitrogen, synthetic air methane 50 to 2.50E4 0.4 50 to 2.50E4 0.4
  • Mechanism for measurement service delivery : Primary reference gas mixtures as Gas-BNDs are disseminated to customers on demand.
  • BND, i.e. Bharatiya Nirdeshak Dravya (Indian Reference Material) is used for CRM
  • Approved on 23 July 2025
  • Institute service identifier : NPLI/BND 6000
  • CMC ID : APMP-QM-IN-00000Q94-1
     
Frequency , Frequency : 10 MHz
Local frequency standard
Relative expanded uncertainty : 2.2E-12 Hz/Hz
Direct frequency measurement
Gate Time : 100 s
Number of Measurements : 100
Amplitude : > 1 V (50 ohm)
Excluded DUC's Effect
Approved on 02 June 2025
Institute service identifier : NPLI/14
CMC ID : APMP-TF-IN-00000PP4-1
 
Frequency , Frequency : 5 MHz
Local frequency standard
Relative expanded uncertainty : 2.2E-12 Hz/Hz
Direct frequency measurement
Gate Time : 100 s
Number of Measurements : 100
Amplitude : > 1 V (50 ohm)
Excluded DUC's Effect
Approved on 02 June 2025
Institute service identifier : NPLI/13
CMC ID : APMP-TF-IN-00000PP3-1
 
Hardness , Hardness : 20 HRA to 88 HRA
Standard Rockwell hardness block
Absolute expanded uncertainty : 0.3 HRA
Rockwell A, ISO 6508-3
Preliminary test force : 98.07 N
Total test force : 588.4 N, 1471 N
Approved on 28 August 2025
Institute service identifier : NPLI/38-16
CMC ID : APMP-M-IN-00000FXQ-2
 
Torque , Torque : 2 N m to 2000 N m
Torque measuring device
Relative expanded uncertainty : 1.0E-2 %
Lever deadweight
Mode : clockwise, anti clockwise
Approved on 21 November 2025
Institute service identifier : NPLI/19
CMC ID : APMP-M-IN-00000FYF-2
 
Mass , Mass : 500 g
Mass standard
Absolute expanded uncertainty : 3.5E1 µg
Comparison in air
Approved on 13 March 2026
Institute service identifier : NPLI/45
CMC ID : APMP-M-IN-00000FY2-3
 

Select Metrology Area

General physics
Acoustics, Ultrasound, Vibration

This metrology area covers the fields of acoustics, ultrasound and vibration.

Electricity and Magnetism

This metrology area covers the fields of DC and AC measurements, impedance, electric and magnetic fields, radiofrequencies and measurements on materials.

Length

This metrology area covers the fields of laser frequencies and dimensional metrology.

Mass and related quantities

This metrology area covers the fields of mass standards, force, pressure, density, hardness, torque, gravity and viscosity.

Chemistry and Biology
Chemistry and Biology

This metrology area covers all fields relevant to chemistry and biology.

Ionizing radiation
Ionizing Radiation

This metrology area covers the fields of dosimetry, radioactivity and neutron measurements.