Results for: Slovenia "MIRS/UM-FS/LTM"
Filters
CMC Quick search Filters close;
CMC Area
To filter, either use the tick boxes or click on the underscored item
In the CMCs uncertainty statements, the notation Q[a, b] stands for the root-sum-square of the terms between brackets: Q[a, b] = [a 2 + b 2]1/2
Unless otherwise stated the expanded uncertainties given below correspond to k = 2 (at a 95 % level of confidence)
Slovenia, MIRS/UM-FS/LTM (MIRS/University of Maribor, Faculty for Mechanical Engineering/Laboratory for Production Management)
Radiations of the mise en pratique ,
Laser radiations
:
633 nm
Frequency stabilized laser: vacuum wavelength
Absolute expanded uncertainty
:
4.0E-2 fm
Optical beat frequency
Approved on 01 April 2010
Institute service identifier : MIRS/UM-FS/LTM-23
CMC ID :
EURAMET-L-SI-00000C42-1
Form ,
Flatness standards
:
0 µm to 100 µm
Surface plates: flatness
Absolute expanded uncertainty
:
0.3 µm to 0.7 µm
Q[0.3 µm, 0.2E-06 L]
Electronic levels
Maximum length L : 3 m
Maximum width : 2 m
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-17
CMC ID :
EURAMET-L-SI-00000C48-2
Linear dimensions ,
Diameter standards
:
0.1 mm to 10 mm
External cylinder (pins or wires): diameter L
Absolute expanded uncertainty
:
0.3 µm
Q[0.3 µm, 3E-06 L]
1-D comparator and laser interferometer and 2 flat probes
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-10
CMC ID :
EURAMET-L-SI-00000C3Q-2
Linear dimensions ,
End standards
:
125 mm to 1000 mm
Length bar (long gauge block): central length L
Absolute expanded uncertainty
:
0.16 µm to 1 µm
Q[0.1 µm, 1E-06 L]
1-D comparator and mechanical
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-6
CMC ID :
EURAMET-L-SI-00000C3O-2
Linear dimensions ,
Diameter standards
:
2 mm to 300 mm
Internal cylinder (ring): diameter L
Absolute expanded uncertainty
:
0.2 µm to 0.9 µm
Q[0.2 µm, 2.8E-06 L]
CMM substitution principle
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-11
CMC ID :
EURAMET-L-SI-00000C47-2
Angle ,
Angle instruments
:
-3 mm/m to 3 mm/m
(spirit) bubble levels: inclination angle
Absolute expanded uncertainty
:
1.1E1 µm/m
Sine bar, gauge blocks
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-14
CMC ID :
EURAMET-L-SI-00000C3T-1
Linear dimensions ,
Length instruments
:
-10 µm to 10 µm
Gauge block comparator: error of indicated displacement L
Absolute expanded uncertainty
:
2.0E1 nm to 4.0E1 nm
20 nm + 0.2E-06 L
Gauge block set
Gauge block length : maximum 100 mm
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-3
CMC ID :
EURAMET-L-SI-00000C45-2
Linear dimensions ,
Length instruments
:
0 m to 2 m
Height measuring instrument: error of indicated displacement L
Absolute expanded uncertainty
:
3.0E-2 µm to 7 µm
Q[0.03 µm, 3.5E-06 L]
Laser interferometer
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-2
CMC ID :
EURAMET-L-SI-00000C44-2
Complex geometry ,
Screw standards
:
0.5 mm to 50 mm
Thread plugs, plain: pitch
Absolute expanded uncertainty
:
0.8 µm
CMM and T stylus
Pitch diameter: : 0.5 mm to 300 mm
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-19
CMC ID :
EURAMET-L-SI-00000C3X-2
Complex geometry ,
Screw standards
:
1 mm to 300 mm
Thread plugs, plain: pitch diameter L
Absolute expanded uncertainty
:
2.5 µm to 2.9 µm
Q[2.5 µm, 4.5E-06 L]
Micrometer and wires, CMM and T stylus (comparator method)
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-18
CMC ID :
EURAMET-L-SI-00000C3W-2
Linear dimensions ,
Length instruments
:
0 m to 5 m
1-D measuring machine: error of indicated displacement L
Absolute expanded uncertainty
:
3.0E-2 µm to 1.8E1 µm
Q[0.03 µm, 3.5E-06 L]
Laser interferometer
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-1
CMC ID :
EURAMET-L-SI-00000C43-2
Linear dimensions ,
Line standards
:
0 mm to 500 mm
Precision line scale: line spacing L
Absolute expanded uncertainty
:
9.0E-2 µm to 0.56 µm
Q[0.09 µm, 1.1E-06 L]
Laser interferometer and CCD microscope
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-25
CMC ID :
EURAMET-L-SI-00000C49-2
Complex geometry ,
Screw standards
:
6 mm to 300 mm
Thread rings, plain: pitch diameter L
Absolute expanded uncertainty
:
2.5 µm to 2.9 µm
Q[2.5 µm, 4.5E-06 L]
CMM and T stylus (comparator method)
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-20
CMC ID :
EURAMET-L-SI-00000C3Y-2
Linear dimensions ,
Diameter standards
:
1 mm to 300 mm
External cylinder: diameter L
Absolute expanded uncertainty
:
0.5 µm to 1 µm
Q[0.5 µm, 3E-06 L]
1-D comparator and laser interferometer and 2 flat probes, gauge substitution
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-9
CMC ID :
EURAMET-L-SI-00000C3P-2
Linear dimensions ,
Line standards
:
0 m to 200 m
(surveyor, engineer) tape: line spacing L
Absolute expanded uncertainty
:
1.0E1 µm to 2.5E3 µm
10 µm + 12.5E-06 L
Laser interferometer and CCD microscope
Approved on 14 September 2018
Institute service identifier : MIRS/UM-FS/LTM-8
CMC ID :
EURAMET-L-SI-00000C46-2
Linear dimensions ,
End standards
:
0.5 mm to 100 mm
Gauge block: central length L
Absolute expanded uncertainty
:
3.5E1 nm to 6.1E1 nm
Q[35 nm, 0.5E-06 L]
Mechanical comparison
Approved on 14 September 2010
Institute service identifier : MIRS/UM-FS/LTM-5
CMC ID :
EURAMET-L-SI-00000C3N-2
Radiations of the mise en pratique ,
Laser radiations
:
633 nm
Frequency stabilized laser: vacuum wavelength
Relative expanded uncertainty
:
1.0E-9
Optical beat frequency
Approved on 01 April 2010
Institute service identifier : MIRS/UM-FS/LTM-24
CMC ID :
EURAMET-L-SI-00000C4A-1
Radiations of the mise en pratique ,
Laser radiations
:
474 THz
Frequency stabilized laser: absolute frequency
Absolute expanded uncertainty
:
2.4E1 kHz
Optical beat frequency
Approved on 01 April 2010
Institute service identifier : MIRS/UM-FS/LTM-23
CMC ID :
EURAMET-L-SI-00000C41-1
Complex geometry ,
Screw standards
:
0.5 mm to 50 mm
Thread rings, plain: pitch
Absolute expanded uncertainty
:
0.8 µm
CMM and T stylus
Pitch diameter: : 6 mm to 300 mm
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-21
CMC ID :
EURAMET-L-SI-00000C3Z-2
Angle ,
Angle artifacts
:
90 °
90° cylinder: squareness
Absolute expanded uncertainty
:
0.9 second
CMM
Maximum length : 500 mm
Maximum diameter : 300 mm
Approved on 22 March 2005
Institute service identifier : MIRS/UM-FS/LTM-16
CMC ID :
EURAMET-L-SI-00000C3V-2
