to BIPM.org
CIPM MRA PARTICIPANTS
All data listed in the KCDB have been reviewed and approved within the CIPM Mutual Recognition Arrangement
Menu
Login
CIPM MRA PARTICIPANTS
CMC statistics
Results for: Serbia "DMDM"
Filters
CMC Quick search Filters close;
?
Added keywords act as an additional filter. Keywords separated by a space will be treated by the logical function AND automatically. You may also use OR. Keyword searches also find close matches. Placing quotation marks (") before and after the search word, e.g. "word", will allow for exact matches.

In case of multiple search, please use ADVANCED SEARCH.
173 results
Reset all
CMC Area
To filter, either use the tick boxes or click on the underscored item
General physics
Chemical material
Chemical Analyte
Geographical location
In the CMCs uncertainty statements, the notation Q[a, b] stands for the root-sum-square of the terms between brackets: Q[a, b] = [a 2 + b 2]1/2
Unless otherwise stated the expanded uncertainties given below correspond to k = 2 (at a 95 % level of confidence)
Serbia, DMDM (Directorate of Measures and Precious Metals)
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Mass fraction in mg/g Relative expanded uncertainty in % Mass fraction in % Absolute expanded uncertainty in %
water ethanol 0.1 to 8 1.4
  • Mechanism for measurement service delivery : Calibration
  • Approved on 16 September 2023
  • Institute service identifier : RU-H12
  • CMC ID : EURAMET-QM-RS-00000O9A-1
     
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Amount-of-substance fraction in nmol/mol Absolute expanded uncertainty in nmol/mol Amount-of-substance fraction in % Absolute expanded uncertainty in %
purified air ozone 0 to 1000 1.1 to 2.2E1
  • Uncertainty equation CMC : Q[1.1, 0.022 x(O3)] The uncertainty is expressed in nmol/mol
  • Mechanism for measurement service delivery : Calibration
  • Approved on 28 June 2016
  • Institute service identifier : GMH-RU-H09
  • CMC ID : EURAMET-QM-RS-000000VQ-3
     
Measurement microphones , Pressure sensitivity level
Measurement microphone type LS2P
Absolute expanded uncertainty : 0.46 dB
IEC 61094-2:1992
Frequency : 25 kHz
Approved on 27 February 2014
Institute service identifier : DMDM/1.2
CMC ID : EURAMET-AUV-RS-000006EI-1
 
Fluid flow , Volume of liquid : 1 mL to 1.00E4 mL
Glassware equipment (Pipettes, flasks, burettes, cylinders)
Relative expanded uncertainty : 1.5E-2 %
Gravimetric
Liquid : water
Reference temperature : 20 °C
Approved on 17 November 2017
Institute service identifier : DMDM/RU-Z03
CMC ID : EURAMET-M-RS-000009KJ-1
 
Mass , Conventional mass : 1 mg to 100 mg
Mass standard
Absolute expanded uncertainty : 1.3 µg to 2 µg
Comparison in air
Temperature : (20 to 24) °C with max ± 0.3 °C/h and max ± 0.5 °C/12 h
Relative humidity : 40 % to 60 % with max ± 5 % per 4 hours
Pressure : 995 hPa to 1020 hPa
Approved on 04 May 2010
CMC ID : EURAMET-M-RS-000009K8-1
 
Mass , Conventional mass : 100 kg to 500 kg
Mass standard
Absolute expanded uncertainty : 0.5 g to 8 g
Comparison in air
Temperature : (20 to 24) °C with max ± 1.5 °C/h and max ± 2 °C/12 h
Relative humidity : 40 % to 60 % with max ± 10 % per 4 hours
Pressure : 995 hPa to 1020 hPa
Approved on 04 May 2010
CMC ID : EURAMET-M-RS-000009KH-1
 
Fluid flow , Volume of liquid : 5 L to 5000 L
Proving tanks
Relative expanded uncertainty : 3.0E-2 %
Volumetric
Liquid : water
Reference temperature : 20 °C
Approved on 17 November 2017
Institute service identifier : DMDM/RU-Z06
CMC ID : EURAMET-M-RS-000009KL-1
 
Frequency , Frequency : 10 MHz
Local frequency standard
Relative expanded uncertainty : 1.0E-13 Hz/Hz
Phase time measurement
Averaging time : 1 day
Approved on 10 March 2008
Institute service identifier : DMDM/TF-2.1.1b
CMC ID : EURAMET-TF-RS-00000B49-1
 
Items for disseminating ITS-90 and PLTS 2000 , Temperature : -40 °C to 20 °C
Liquid-in-glass thermometer resolution 0.1 °C
Absolute expanded uncertainty : 3.3E-2 °C
Calibration by comparison
Ethanol bath
Approved on 03 November 2009
Institute service identifier : DMDM/T06-4
CMC ID : EURAMET-T-RS-00000BDN-1
 
Items for disseminating ITS-90 and PLTS 2000 , Temperature : -40 °C to 20 °C
Liquid-in-glass thermometer resolution 1 °C
Absolute expanded uncertainty : 0.35 °C
Calibration by comparison
Ethanol bath
Approved on 03 November 2009
Institute service identifier : DMDM/T06-7
CMC ID : EURAMET-T-RS-00000BDQ-1
 
Items for disseminating ITS-90 and PLTS 2000 , Temperature : -40 °C to 20 °C
Platinum Resistance Thermometer
Absolute expanded uncertainty : 9.0E-3 °C
Calibration by comparison
Ethanol bath
Approved on 03 November 2009
Institute service identifier : DMDM/T02-1
CMC ID : EURAMET-T-RS-00000BDH-1
 
Items for disseminating ITS-90 and PLTS 2000 , Temperature : 300 °C to 600 °C
Base-metal thermocouple
Absolute expanded uncertainty : 0.51 °C to 0.87 °C
Calibration by comparison
Comparison furnace
Approved on 19 March 2012
Institute service identifier : DMDM/T04-5
CMC ID : EURAMET-T-RS-00000BDY-1
 
Items for disseminating ITS-90 and PLTS 2000 , Temperature : 600 °C to 1000 °C
Base-metal thermocouple
Absolute expanded uncertainty : 0.87 °C to 1.5 °C
Calibration by comparison
Comparison furnace
Approved on 19 March 2012
Institute service identifier : DMDM/T04-6
CMC ID : EURAMET-T-RS-00000BDZ-1
 
Items for defining ITS-90 , Temperature : -38.8344 °C
Long SPRT in Mercury triple point
Absolute expanded uncertainty : 1 mK
Direct comparison
Ethanol bath
Approved on 17 January 2013
Institute service identifier : DMDM/T01-2
CMC ID : EURAMET-T-RS-00000BDC-1
 
Impedance (up to the MHz range) , Capacitance for dielectric capacitors : 0.01 nF to 1.00E4 nF
Fixed capacitor, switched capacitor, capacitance box
Relative expanded uncertainty : 0.59 mF/F to 8.1 mF/F
Uncertainty table
{"row_1":{"col_1":"","col_2":"20 Hz","col_3":"120 Hz","col_4":"1 kHz","col_5":"10 kHz","col_6":"100 kHz","col_7":"1 MHz","col_8":"2 MHz"},"row_2":{"col_1":"0.01 nF","col_2":"-","col_3":"-","col_4":"-","col_5":"-","col_6":"0.81","col_7":"0.72 to 0.81","col_8":"0.84"},"row_3":{"col_1":"0.1 nF","col_2":"-","col_3":"-","col_4":"-","col_5":"-","col_6":"0.62","col_7":"0.61 to 0.63","col_8":"0.71"},"row_4":{"col_1":"1 nF","col_2":"-","col_3":"-","col_4":"0.71 to 1.31","col_5":"-","col_6":"-","col_7":"0.59 to 0.69","col_8":"0.60 to 0.78"},"row_5":{"col_1":"100 nF","col_2":"-","col_3":"0.6","col_4":"-","col_5":"-","col_6":"0.69","col_7":"-","col_8":"-"},"row_6":{"col_1":"10000 nF","col_2":"3.06","col_3":"3.06","col_4":"3.1","col_5":"3.56","col_6":"8.07","col_7":"-","col_8":"-"}}
The expanded uncertainties given in this table are expressed in mF/F
LCR meter
Frequency : 20 Hz to 2 MHz
Approved on 06 August 2013
Institute service identifier : DMDM/109
CMC ID : EURAMET-EM-RS-00000ES4-1
 
DC voltage (up to 1100 V) , DC voltage sources: single values : 1 V to 10 V
Standard cell, solid state voltage standard
Absolute expanded uncertainty : 0.45 µV to 1.0E1 µV
Uncertainty table
{"row_1":{"col_1":"","col_2":"Expanded uncertainty / µV ","col_3":"Reference Stanard used in calibration"},"row_2":{"col_1":"1.018 V","col_2":"0.12","col_3":"Josephson Voltage Standard"},"row_3":{"col_1":"1 V","col_2":"0.12","col_3":"Josephson Voltage Standard"},"row_4":{"col_1":"10 V","col_2":"0.04","col_3":"Josephson Voltage Standard"},"row_5":{"col_1":"1.018 V","col_2":"0.45","col_3":"Group of standard cells and solid state voltage standards"},"row_6":{"col_1":"1 V","col_2":"1","col_3":"Group of standard cells and solid state voltage standards"},"row_7":{"col_1":"10 V","col_2":"1","col_3":"Group of standard cells and solid state voltage standards"}}
Difference measurement
Fixed voltage : 1.018 V, 1 V, 10 V
Approved on 06 August 2013
Institute service identifier : DMDM/1
CMC ID : EURAMET-EM-RS-00000ERH-1
 
Impedance (up to the MHz range) , Capacitance: meters : 1 pF to 1000 pF
Capacitance bridge, LCR meter
Relative expanded uncertainty : 5.0E-3 mF/F to 0.26 mF/F
Uncertainty table
{"row_1":{"col_1":"","col_2":" 1 kHz","col_3":"100 Hz to 1 MHz"},"row_2":{"col_1":"1 pF","col_2":"0.01","col_3":"0.03 to 0.26"},"row_3":{"col_1":"10 pF","col_2":"0.007","col_3":"0.012 to 0.13"},"row_4":{"col_1":"100 pF","col_2":"0.007","col_3":"0.012 to 0.09"},"row_5":{"col_1":"1000 pF","col_2":"0.005","col_3":"0.01 to 0.014"}}
The expanded uncertainties given in this table are expressed in mF/F
Direct measurement
Frequency : 100 Hz to 1 MHz
Approved on 06 August 2013
Institute service identifier : DMDM/110
CMC ID : EURAMET-EM-RS-00000ES5-1
 
DC current (up to 100 A) , DC current sources: low values : 0.1 mA
Current generator, multifunction calibrator
Absolute expanded uncertainty : 1.3 nA
Voltage drop across standard resistor
Power dissipation of standard resistor : 0.1 mW
Approved on 06 August 2013
Institute service identifier : DMDM/78
CMC ID : EURAMET-EM-RS-00000ERI-1
 
Measurement microphones , Pressure sensitivity level
Measurement microphone type LS1P
Absolute expanded uncertainty : 8.0E-2 dB
IEC 61094-2:1992
Frequency : 63 Hz to 3.15 kHz
Approved on 27 February 2014
Institute service identifier : DMDM/1.1
CMC ID : EURAMET-AUV-RS-000006E7-1
 
Measurement microphones , Pressure sensitivity level
Measurement microphone type LS1P
Absolute expanded uncertainty : 9.0E-2 dB
IEC 61094-2:1992
Frequency : 4 kHz
Approved on 27 February 2014
Institute service identifier : DMDM/1.1
CMC ID : EURAMET-AUV-RS-000006E8-1
 

Select Metrology Area

General physics
Acoustics, Ultrasound, Vibration

This metrology area covers the fields of acoustics, ultrasound and vibration.

Electricity and Magnetism

This metrology area covers the fields of DC and AC measurements, impedance, electric and magnetic fields, radiofrequencies and measurements on materials.

Length

This metrology area covers the fields of laser frequencies and dimensional metrology.

Mass and related quantities

This metrology area covers the fields of mass standards, force, pressure, density, hardness, torque, gravity and viscosity.

Photometry and Radiometry

Thermometry

Time and Frequency

Chemistry and Biology
Chemistry and Biology

This metrology area covers all fields relevant to chemistry and biology.

Ionizing radiation
Ionizing Radiation

This metrology area covers the fields of dosimetry, radioactivity and neutron measurements.