Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
The BIPM key comparison database
Refine your search
METROLOGY AREA
Electricity and Magnetism (20)
Mass (14)
Ionizing Radiation (9)
Length (9)
Thermometry (8)
Photometry and Radiometry (2)
Time and Frequency (1)
TYPE
Key comparisons (42)
Supplementary comparisons (21)
STATUS
Approved for equivalence (27)
Approved (18)
Continuous, approved for equivalence (6)
Approved for provisional equivalence (2)
Planned (2)
Measurements completed (2)
Protocol complete (2)
Measurements in progress (2)
Abandoned (1)
Report in progress, draft B (1)
ORGANISATIONS
EURAMET (formerly EUROMET) (52)
BIPM (5)
CCEM (4)
CCL (1)
CCTF (1)
Result of the search
Your query 'Norway' produced 63 results New search
1  2  3 [Next >>]

  BIPM.EM- K13.a Comparison of resistance standards
1993 -
Comparison type, Field   Key comparison in Electricity and Magnetism, Resistance
Resistance: 1 ohm
Status   Continuous, approved for equivalence, Results available
  BIPM.EM- K11.a DC voltage, Zener diode
1992 -
Comparison type, Field   Key comparison in Electricity and Magnetism, DC Voltage and Current
DC voltage: 1.018 V
Status   Continuous, approved for equivalence, Results available
  CCEM- K6.a Comparison of AC/DC voltage transfer standards
1993 - 1999
Comparison type, Field   Key comparison in Electricity and Magnetism, AC Voltage, Current, Power, and AC/DC Transfer
Parameter(s)   Voltage: 3 V
Frequency: 1 kHz, 20 kHz, 100 kHz and 1 MHz
Status   Approved for equivalence, Results available
  BIPM.L- K10 Comparison of the frequencies of Helium-Neon lasers at wavelength 633 nm
1988 - 2000
Comparison type, Field   Key comparison in Length, Laser Frequencies
Status   Approved for equivalence, Results available
  EUROMET.L- S14 Steel tape measurements
2003 - 2004
Comparison type, Field   Supplementary comparison in Length, Dimensional Metrology
Tape length from 10 m to 50 m
Status   Approved
  EUROMET.EM.BIPM- K11 DC voltage, Zener diode
1998 - 2000
Comparison type, Field   Key comparison in Electricity and Magnetism, DC Voltage and Current
DC voltage: 10 V
Status   Approved for equivalence, Results available
  EUROMET.EM- K11 AC/DC voltage transfer difference at low voltages
2005 - 2008
Comparison type, Field   Key comparison in Electricity and Magnetism, AC Voltage, Current, Power, and AC/DC Transfer
Parameter(s)   Voltage: 10 mV and 100 mV
Frequency: 1 kHz, 20 kHz, 100 kHz, and 1 MHz
Status   Approved for equivalence, Results available
  EUROMET.L- K1 Gauge blocks by interferometry
1999 - 2000
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Steel and tungsten carbide materials
Status   Approved for equivalence, Results available
  EUROMET.L- K1.1 Gauge blocks by interferometry
2002 - 2003
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Status   Approved for equivalence, Results available
  EUROMET.M.M- K2 Comparison of mass standards
2002 - 2003
Comparison type, Field   Key comparison in Mass, Mass Standards
Mass: 100 mg, 2 g, 20 g, 500 g and 10 kg
Status   Approved for equivalence, Results available
  EUROMET.M.M- K4 Comparison of mass standards
2001 - 2003
Comparison type, Field   Key comparison in Mass, Mass Standards
Mass: 1 kg
Status   Approved for equivalence, Results available
  BIPM.EM- K13.b Comparison of resistance standards
1993 -
Comparison type, Field   Key comparison in Electricity and Magnetism, Resistance
Resistance: 10 kiloohms
Status   Continuous, approved for equivalence, Results available
  CCEM- K1 Comparison of resistance standards
1990 - 1991
Comparison type, Field   Key comparison in Electricity and Magnetism, Resistance
Resistance: 1 ohm and 10 kiloohms
Status   Approved for provisional equivalence
  CCEM- K12 Comparison of AC-DC current transfer standards
2005 - 2007
Comparison type, Field   Key comparison in Electricity and Magnetism, AC Voltage, Current, Power, and AC/DC Transfer
Parameter(s)   Current: 10 mA and 5 A
Frequency: 10 Hz, 55 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz and 100 kHz
Status   Approved for equivalence, Results available
  EUROMET.EM- K5 AC power at 50/60 Hz
1996 - 2001
Comparison type, Field   Key comparison in Electricity and Magnetism, AC Voltage, Current, Power, and AC/DC Transfer
Parameter(s)   Power factor: 1.0, 0.5 Lead, 0.5 Lag, 0.0 Lead, 0.0 Lag
Status   Approved for equivalence, Results available
  EUROMET.EM- K8 Comparison of DC voltage ratios
1998 - 2002
Comparison type, Field   Key comparison in Electricity and Magnetism, DC Voltage and Current
Ratio: 1000 V / 10 V and 100 V / 10 V
Status   Approved for equivalence, Results available
  EUROMET.EM- S15 Comparison of resistance standards
1998
Comparison type, Field   Supplementary comparison in Electricity and Magnetism, Resistance
Status   Approved
  EUROMET.M.M- K1 Comparison of mass standards
1992 - 1999
Comparison type, Field   Key comparison in Mass, Mass Standards
Mass: 1 kg
Status   Approved for equivalence, Results available
  BIPM.EM- K11.b DC voltage, Zener diode
1992 -
Comparison type, Field   Key comparison in Electricity and Magnetism, DC Voltage and Current
DC voltage: 10 V
Status   Continuous, approved for equivalence, Results available
  EUROMET.EM- K10 Comparison of resistance standards
2003 - 2005
Comparison type, Field   Key comparison in Electricity and Magnetism, Resistance
Resistance: 100 ohms
Status   Approved for equivalence, Results available