Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
The BIPM key comparison database
Refine your search
CMC AREA
CMCs Chemistry (445)
CMCs General Physics (383)
CMCs Ionizing Radiation (187)
PHYSICS >
Materials
Photometry
Properties of detectors and sources
Properties of materials (65)
Temperature (56)
Radio frequency measurements (50)
Dimensional metrology (45)
AC voltage, current, and power (20)
Electric and magnetic fields (18)
Fluid flow (14)
Impedance up to the MHz range (13)
Sound in water (11)
DC voltage, current, and resistance (11)
Pressure (11)
Laser frequencies (10)
IONIZING RADIATION >
Activity (76)
Activity per unit mass (31)
Absorbed dose to water (15)
Fluence rate (14)
Emission rate (10)
Air kerma (10)
Surface emission rate (7)
Ambient dose equivalent rate (6)
Personal dose equivalent rate (6)
Emission anisotropy (6)
CHEMICAL MATERIAL >
monoelemental solution
nitrogen (183)
methane (44)
synthetic air (27)
nitrogen or air (17)
synthetic natural gas (12)
CHEMICAL ANALYTE >
methane (21)
carbon dioxide (13)
carbon monoxide (12)
propane (12)
ethane (9)
GEOGRAPHIC LOCATION
EURAMET (1015)
United Kingdom (1008)
Denmark (7)
Result of the search
Your query 'United Kingdom' produced more than 1000 results New search
[Prev] 2  3  4 [Next >>]

 
United Kingdom, NPL (National Physical Laboratory)
Complete CMCs in Photometry and Radiometry for United Kingdom (.PDF file)
Radiance factor. General material, 0.25 % to 300000 %
Absolute expanded uncertainty (k = 2, level of confidence 95 %): (0.01% + 0.0034R)
Reference reflectometer
Wavelength range: 350 nm to 400 nm
Bandwidth: 10 nm to 20 nm
Uncertainty values are for 0/45 geometry and white Spectralon. Uncertainty varies with scattering geometry and angular dependence of scattering properties of material
Approved on 07 May 2007
 
Radiance factor. General material, 0.1 % to 300000 %
Absolute expanded uncertainty (k = 2, level of confidence 95 %): (0.01% + 0.0019R)
Reference reflectometer
Wavelength range: 400 nm to 1000 nm
Bandwidth: 10 nm to 20 nm
Uncertainty values are for 0/45 geometry and white Spectralon. Uncertainty varies with scattering geometry and angular dependence of scattering properties of material
Approved on 07 May 2007
 
Wavelength. Spectrally-selective transmitting material, 200 nm to 2500 nm
Absolute expanded uncertainty (k = 2, level of confidence 95 %) in nm: 0.1
Scanning spectrophotometer
Wavelength range: 200 nm to 2500 nm
Bandwidth: 0.1 nm to 5 nm
Approved on 07 May 2007
 
Wavenumber. Spectrally-selective transmitting material, 1028 cm-1 to 3060 cm-1
Absolute expanded uncertainty (k = 2, level of confidence 95%) in cm-1: 0.2 to 0.3 (depending on wavenumber)
Scanning spectrophotometer
Wavenumber values: 3060 cm-1, 2850 cm-1, 1943 cm-1, 1601 cm-1, 1583 cm-1, 1154 cm-1, 1028 cm-1
Bandwidth: 2 cm-1 to 10 cm-1
Approved on 07 May 2007
 
Colour, surface, x, y, Y. General material, x, y = 0 to x, y = 0.9
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.0002
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Type of material: non-fluorescent
Approved on 07 May 2007
 
Colour, surface, x, y, Y. General material, Y = 0 to Y = 1
Absolute expanded uncertainty (k = 2, level of confidence 95 %): (0.0005 + 0.0035Y)
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Type of material: non-fluorescent
Approved on 07 May 2007
 
Colour, surface, x, y, Y. Fluorescent material, x, y = 0 to x, y = 0.9
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.003
Reference spectrofluorimeter
Type of source used: monochromator
Specific measurement conditions: 0/45
Type of fluorescent material: general
Approved on 07 May 2007
 
Colour, surface, x, y, Y. Fluorescent material, Y = 0 to Y = 300
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.003
Reference spectrofluorimeter
Type of source used: monochromator
Specific measurement conditions: 0/45
Type of fluorescent material: general
Approved on 07 May 2007
 
Colour, surface, x, y, Y. Diffusely reflecting material, x, y = 0 to x, y = 0.9
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.0002
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Other types of material can also be calibrated
Approved on 07 May 2007
 
Colour, surface, x, y, Y. Diffusely reflecting material, Y = 0 to Y = 1
Absolute expanded uncertainty (k = 2, level of confidence 95 %): (0.0005 + 0.0035Y)
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Other types of material can also be calibrated
Approved on 07 May 2007
 
Colour, surface, L*a*b*. General material, L* = 0 to L* = 100
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.15
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Type of material: non-fluorescent
Approved on 07 May 2007
 
Colour, surface, L*a*b*. General material, a*, b* = -200 to a*, b* = 200
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.1
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Type of material: non-fluorescent
Approved on 07 May 2007
 
Colour, surface, L*a*b*. Fluorescent material, L* = 0 to L* = 160
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.003
Reference spectrofluorimeter
Irradiation conditions: monochromator
Specific measurement conditions: 0/45
Type of fluorescent material: general
Approved on 07 May 2007
 
Colour, surface, L*a*b*. Fluorescent material, a*, b* = -200 to a*, b* = 200
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 1.2
Reference spectrofluorimeter
Irradiation conditions: monochromator
Specific measurement conditions: 0/45
Type of fluorescent material: general
Approved on 07 May 2007
 
Colour, surface, L*a*b*. Diffusely reflecting material, L* = 0 to L* = 100
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.15
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Other types of material can also be calibrated
Approved on 07 May 2007
 
Colour, surface, L*a*b*. Diffusely reflecting material, a*, b* = -200 to a*, b* = 200
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.1
Integrating sphere spectrophotometer
Specific measurement conditions: 0/d, 2 nm bandwidth
Other types of material can also be calibrated
Approved on 07 May 2007
 
Colour, transmitted, x, y, Y. General material, x, y = 0 to x, y = 0.9
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.0002
Spectrophotometer
Specific measurement conditions: regular transmittance geometry
Type of material: non-fluorescent
 
Colour, transmitted, x, y, Y. General material, Y = 0 to Y = 1
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.003
Spectrophotometer
Specific measurement conditions: regular transmittance geometry
Type of material: non-fluorescent
 
Colour, transmitted, L*a*b*. General material, L* = 0 to L* = 100
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.05
Spectrophotometer
Specific measurement conditions: regular transmittance geometry
Type of material: non-fluorescent
 
Colour, transmitted, L*a*b*. General material, a*, b* = -200 to a*, b* = 200
Absolute expanded uncertainty (k = 2, level of confidence 95 %): 0.05
Spectrophotometer
Specific measurement conditions: regular transmittance geometry
Type of material: non-fluorescent