Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
The BIPM key comparison database
Refine your search
METROLOGY AREA
Length (5)
Electricity and Magnetism (4)
Mass (4)
Thermometry (3)
TYPE
Key comparisons (16)
STATUS
Approved for equivalence (16)
ORGANISATIONS
EURAMET (formerly EUROMET) (15)
APMP (1)
Result of the search
Your query 'Ireland' produced 16 results New search

  EUROMET.EM.BIPM- K11 DC voltage, Zener diode
1998 - 2000
Comparison type, Field   Key comparison in Electricity and Magnetism, DC Voltage and Current
DC voltage: 10 V
Status   Approved for equivalence, Results available
  EUROMET.L- K2 Long gauge blocks from 150 mm to 900 mm
2002 - 2005
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Status   Approved for equivalence, Results available
  EUROMET.M.M- K2 Comparison of mass standards
2002 - 2003
Comparison type, Field   Key comparison in Mass, Mass Standards
Mass: 100 mg, 2 g, 20 g, 500 g and 10 kg
Status   Approved for equivalence, Results available
  EUROMET.M.M- K4 Comparison of mass standards
2001 - 2003
Comparison type, Field   Key comparison in Mass, Mass Standards
Mass: 1 kg
Status   Approved for equivalence, Results available
  EUROMET.M.P- K3.b Pressure measurements in gas (gauge mode)
1999 - 2001
Comparison type, Field   Key comparison in Mass, Pressure
Pressure: 0.08 MPa to 7 MPa
Status   Approved for equivalence, Results available
  EUROMET.EM- K10 Comparison of resistance standards
2003 - 2005
Comparison type, Field   Key comparison in Electricity and Magnetism, Resistance
Resistance: 100 ohms
Status   Approved for equivalence, Results available
  EUROMET.T- K3 Realizations of the ITS-90 from 83.8 K to 692.7 K
2001 - 2004
Comparison type, Field   Key comparison in Thermometry, Standard Platinum Resistance Thermometers
Status   Approved for equivalence, Results available
  EUROMET.T- K6 Comparison of humidity standards: dew and frost point temperatures
2004 - 2008
Comparison type, Field   Key comparison in Thermometry, Humidity
Temperature: -50 °C to 20 °C
Status   Approved for equivalence
  EUROMET.EM- K2 Comparison of resistance standards
2005 - 2007
Comparison type, Field   Key comparison in Electricity and Magnetism, Resistance
Resistance: 10 megaohms and 1 gigaohm
Status   Approved for equivalence, Results available
  EUROMET.L- K7.2006 Linescales
2006 - 2008
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Length smaller or equal to 100 mm
Status   Approved for equivalence, Results available
  EUROMET.L- K5.2004 Step gauge
2004 - 2007
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Status   Approved for equivalence, Results available
  APMP.L- K6 Two-dimensional coordinate measuring machine artefacts
2006 - 2008
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Status   Approved for equivalence, Results available
  EUROMET.L- K6 Two-dimensional coordinate measuring machine artefacts
2004 - 2006
Comparison type, Field   Key comparison in Length, Dimensional Metrology
Status   Approved for equivalence, Results available
  EUROMET.T- K7 Comparison of water triple point cells
2006 - 2007
Comparison type, Field   Key comparison in Thermometry, Fixed Point Cells
Temperature: 273.16 K
Status   Approved for equivalence, Results available
  EURAMET.M.P- K8 Pressure measurements (gauge and absolute mode)
2009 - 2012
Comparison type, Field   Key comparison in Mass, Pressure
Area of piston-cylinder
Parameter(s)   Pressure: 25 kPa to 200 kPa
Status   Approved for equivalence, Results available
  EURAMET.EM- K12 Comparison of AC/DC current transfer standards
2012 - 2014
Comparison type, Field   Key comparison in Electricity and Magnetism, AC Voltage, Current, Power, and AC/DC Transfer
Parameter(s)   Current: 10 mA and 5 A
Frequency: 10 Hz, 55 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz and 100 kHz
Status   Approved for equivalence, Results available