Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
The BIPM key comparison database
Refine your search
CMC AREA
CMCs General Physics (4)
PHYSICS
Photometry
Properties of detectors and sources
Radio frequency measurements (4)
Scalar RF attenuation and gain: in coaxials (4)
IONIZING RADIATION
Emission rate
GEOGRAPHIC LOCATION
EURAMET (4)
United Kingdom (4)
Result of the search
Your query 'United Kingdom' produced 4 results New search

 
United Kingdom, NPL (National Physical Laboratory)
Complete CMCs in Electricity and Magnetism for United Kingdom (.PDF file)
Scalar RF attenuation and gain: in coaxials. Passive device, amplifier: , 0.01 dB to 100 dB
Absolute expanded uncertainty (k = 2, level of confidence 95 %) in dB: (6E-04 + 6E-05), in dB
Voltage ratio
Frequency range: 10 kHz and 50 kHz, 0.5 MHz to 18 GHz
Reflection coefficient: <= 0.005
Impedance: 50
Alpha refers to magnitude of gain or attenuation, measurements are done at a fixed detection level, gain would be limited to 100 mW output power
Approved on 06 August 2013
Internal NMI service identifier: 371
 
Scalar RF attenuation and gain: in coaxials. Passive device, amplifier: , 100 dB to 120 dB
Absolute expanded uncertainty (k = 2, level of confidence 95 %) in dB: 0.01
IF series substitution
Frequency range: 10 kHz and 50 kHz, 0.5 MHz to 18 GHz
Reflection coefficient: <= 0.005
Impedance: 50
Alpha refers to magnitude of gain or attenuation, measurements are done at a fixed detection level, gain would be limited to 100 mW output power. Measurement lower limit at > 100 dB.
Approved on 06 August 2013
Internal NMI service identifier: 372
 
Scalar RF attenuation and gain: in coaxials. Passive device, amplifier: , 120 dB to 140 dB
Absolute expanded uncertainty (k = 2, level of confidence 95 %) in dB: 0.02
IF series substitution
Frequency range: 10 kHz and 50 kHz, 0.5 MHz to 18 GHz
Reflection coefficient: <= 0.005
Impedance: 50
Alpha refers to magnitude of gain or attenuation, measurements are done at a fixed detection level, gain would be limited to 100 mW output power. Measurement lower limit at > 120 dB.
Approved on 06 August 2013
Internal NMI service identifier: 373
 
Scalar RF attenuation and gain: in coaxials. Passive device, amplifier: , 0.01 dB to 80 dB
Absolute expanded uncertainty (k = 2, level of confidence 95 %) in dB: 2E-04, in dB
Voltage ratio
Frequency range: 18 GHz to 40 GHz
Reflection coefficient: <= 0.005
Impedance: 50
Alpha refers to magnitude of gain or attenuation, measurements are done at a fixed detection level, gain would be limited to 100 mW output power
Approved on 06 August 2013
Internal NMI service identifier: 377