Dr M.L. Rastello
Scientific Director, Member of the CIPM
Istituto Nazionale di Ricerca Metrologica
Dr J. Viallon
Bureau International des Poids et Mesures
Agency for Science, Technology and Research
[NMC, A*STAR], Singapore
All-Russian Scientific Research Institute for Optical and Physical Measurements, Rosstandart
Centro Nacional de Metrología
Conservatoire national des arts et métiers/Institut National de Métrologie
[LNE-Cnam], La Plaine-Saint-Denis
Czech Metrology Institute
Federal Institute of Metrology METAS
Instituto de Optica 'Daza de Valdés'
Istituto Nazionale di Ricerca Metrologica
Korea Research Institute of Standards and Science
Measurement Standards Laboratory of New Zealand
[MSL], Lower Hutt
National Institute of Metrology
National Institute of Standards and Technology
National Measurement Institute, Australia
[NMIA], Lindfield NSW 2070
National Metrology Institute of Japan, AIST
National Metrology Institute of South Africa
National Metrology Institute of Turkey
National Physical Laboratory
National Research Council of Canada
Physikalisch-Meteorologisches Obseratorium Davos and World Radiation Center
[PMOD/WRC], Davos Dorf
Slovak Institute of Metrology/Slovenský Metrologický Ústav
VTT Technical Research Centre of Finland Ltd, Centre for Metrology / Mittatekniikan keskus
Commission internationale de l'éclairage
World Meteorological Organization
Industrial Technology Research Institute/Center for Measurement Standards
Instituto Nacional de Metrologia, Qualidade e Tecnologia
Rio de Janeiro
Standards and Calibration Laboratory
The Director of the BIPM is a member, ex officio, of all Consultative Committees.
The Consultative Committees (CCs) operate under the authority of the CIPM. The CIPM appoints the President of each CC, who is expected to chair each CC meeting and report to the CIPM. The President is normally chosen amongst the members of the CIPM.
With the exception of the CCU, which has different membership criteria, membership of the CCs is decided by the CIPM in accordance with the following established criteria.
Membership of a Consultative Committee is open to institutions of Member States that are recognized internationally as most expert in the field. This normally requires that they:
- be national laboratories charged with establishing national standards in the field;
- be active in research and have a record of recent publications in research journals of international repute;
- have demonstrated competence by a record of participation in international comparisons organized either by the Consultative Committee, the BIPM or a regional metrology organization.
In addition the CCs may include as Members:
- relevant intergovernmental organizations, international bodies and scientific unions whose participation would advance the work of the CC;
- named individuals when their knowledge and competence are highly valuable to the CC, even if they come from an institute that does not fulfil the membership criteria.
- Any Member State NMI or designated institute with an interest in the particular scientific field may apply for membership by writing to the Director of the BIPM and presenting its case for membership. The Director will then normally consult the CC President who in turn may consult the CC. If deemed appropriate, at the next meeting of the CIPM the CC President, with the support of the Director of the BIPM, will ask the CIPM to approve Member status.
- Observer status on a CC may be granted to those institutes of Member States and to intergovernmental organizations, international bodies and scientific unions that actively participate in the activities organized under the auspices of the CC and its working groups but do not yet fulfil all the criteria for membership. Observer status is decided by the CIPM.
- The Director of the BIPM is a Member ex officio of each CC and there is usually at least one other BIPM staff member present at each meeting.
- Members and Observers are generally metrology laboratories and specialized institutes, or international organizations, each of which sends a delegate of their choice in response to the convocation issued by the Director of the BIPM on behalf of the CC President. Member institutions may also send technical experts to support their delegate. The number of such experts, typically one or two, is decided by the CC President and is printed on the convocation. The delegate of an Observer may not send an additional technical expert without the prior approval of the CC President.
- The President of a CC may invite other persons to attend a meeting of the CC as Guests. Guests have the same status as Observers for the meeting to which they are invited, but they are invited as a Guest on an individual, one-off basis.
- The CIPM will carry out a formal review of the membership of the CCs every four years in the year following a meeting of the CGPM although the CC President may propose changes at each CIPM meeting.
- The CIPM may decide to remove Member status, change Member status to Observer status, or remove Observer status.
- The list of CC Members and Observers is given in the CC pages on the BIPM website.