Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
 KCDB home  > Free search results
The BIPM key comparison database
Refine your search
CMC AREA
CMCs General Physics (163)
PHYSICS
AC voltage, current, and power
Dimensional metrology (32)
DC voltage, current, and resistance (31)
Impedance up to the MHz range (28)
Mass, mass standards (19)
Sound in air (18)
Pressure (11)
Temperature (11)
Properties of detectors and sources (5)
Frequency (5)
Laser frequencies (2)
Time interval (1)
GEOGRAPHIC LOCATION
APMP (163)
Thailand (163)
Result of the search
Your query 'NIMT' produced 163 results New search
1  2  3 [Next >>]

 
Thailand, NIMT (National Institute of Metrology (Thailand))
Complete CMCs in Acoustics, Ultrasound, Vibration for Thailand (.PDF file)
Pressure sensitivity level. Measurement microphone type LS1P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.05
IEC 61094-2:1992
Frequency: 20 Hz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11101
 
Pressure sensitivity level. Measurement microphone type LS1P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.04
IEC 61094-2:1992
Frequency: 31.5 Hz to 4 kHz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11101
 
Pressure sensitivity level. Measurement microphone type LS1P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.06
IEC 61094-2:1992
Frequency: 8 kHz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11101
 
Pressure sensitivity level. Measurement microphone type LS1P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.07
IEC 61094-2:1992
Frequency: 10 kHz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11101
 
Pressure sensitivity level. Measurement microphone type LS2P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.10
IEC 61094-2:1992
Frequency: 20 Hz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11102
 
Pressure sensitivity level. Measurement microphone type LS2P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.06
IEC 61094-2:1992
Frequency: 31.5 Hz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11102
 
Pressure sensitivity level. Measurement microphone type LS2P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.04
IEC 61094-2:1992
Frequency: 63 Hz to 12.5 kHz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11102
 
Pressure sensitivity level. Measurement microphone type LS2P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.05
IEC 61094-2:1992
Frequency: 16 kHz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11102
 
Pressure sensitivity level. Measurement microphone type LS2P. Measurand unit, dB (reference: 1 V/Pa)
Absolute expanded uncertainty (k = 2, level of confidence 95%) in dB (reference: 1 V/Pa): 0.08
IEC 61094-2:1992
Frequency: 20 kHz
Approved on 11 January 2013
Internal NMI service identifier: NIMT/14010 - 11102
 
DC voltage sources: low value ranges (equal or below 10 V). DC voltage source, multifunction calibrator, voltage V, 0 V to 10 V
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µV: (0.5 v + 2), v in V
Compare against DC standard
Internal NMI service identifier: NIMT/7
 
DC voltage sources: intermediate values (higher than 10 V to 1100 V). DC voltage source, multifunction calibrator, voltage V, > 10 V to 100 V
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µV: (0.5 v + 15), v in V
Compare against DC standard
Internal NMI service identifier: NIMT/8
 
DC voltage sources: intermediate values (higher than 10 V to 1100 V). DC voltage source, multifunction calibrator, voltage V, > 100 V to 1000 V
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µV: (0.8 v + 200), v in V
Compare against DC standard
Internal NMI service identifier: NIMT/9
 
Inductance: self inductance and equivalent series resistance, low values (below 1 mH). Fixed inductor, 100 µH
Relative expanded uncertainty (k = 2, level of confidence 95%) in mH/H: 0.35
Compare against reference standard
Frequency: 1 kHz
Internal NMI service identifier: NIMT/55
 
Inductance: self inductance and equivalent series resistance, intermediate values (higher than or equal to 1 mH to 1 H). Fixed inductor, 10 mH
Relative expanded uncertainty (k = 2, level of confidence 95%) in mH/H: 0.23
Compare against reference standard
Frequency: 1 kHz
Internal NMI service identifier: NIMT/56
 
Inductance: self inductance and equivalent series resistance, intermediate values (higher than or equal to 1 mH to 1 H). Fixed inductor, 100 mH
Relative expanded uncertainty (k = 2, level of confidence 95%) in mH/H: 0.23
Compare against reference standard
Frequency: 1 kHz
Internal NMI service identifier: NIMT/57
 
Inductance: self inductance and equivalent series resistance, intermediate values (higher than or equal to 1 mH to 1 H). Fixed inductor, 1 H
Relative expanded uncertainty (k = 2, level of confidence 95%) in mH/H: 0.23
Compare against reference standard
Frequency: 1 kHz
Internal NMI service identifier: NIMT/58
 
Inductance: self inductance and equivalent series resistance, high values (higher than 1 H). Fixed inductor, 10 H
Relative expanded uncertainty (k = 2, level of confidence 95%) in mH/H: 0.23
Compare against reference standard
Frequency: 1 kHz
Internal NMI service identifier: NIMT/59
 
DC voltage sources: single values. Solid state voltage standard, 10 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.4
Compare against DC standard
Internal NMI service identifier: NIMT/1
 
DC voltage sources: single values. Solid state voltage standard, standard cell, 1.018 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.9
Compare against DC standard
Internal NMI service identifier: NIMT/2
 
DC voltage sources: low values (equal or below 10 V). DC voltage source, multifunction calibrator, 100 mV
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 5
Compare against DC standard
Internal NMI service identifier: NIMT/3