Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
 KCDB home  > Free search results
The BIPM key comparison database
Refine your search
CMC AREA
CMCs General Physics (287)
PHYSICS >
Density
Radio frequency measurements (52)
Mass, mass standards (28)
Sound in air (23)
Dimensional metrology (20)
Pressure (18)
Vibration (16)
Fluid flow (16)
Impedance up to the MHz range (16)
Torque, Viscosity, Hardness and Gravity (15)
Force (15)
AC voltage, current, and power (15)
Temperature (15)
GEOGRAPHIC LOCATION
SIM (287)
Mexico (287)
Result of the search
Your query 'cenam' produced 287 results New search
1  2  3 [Next >>]

 
Mexico, CENAM (Centro Nacional de Metrologia)
Complete CMCs in Length for Mexico (.PDF file)
Laser radiations. Stabilized laser of the mise en pratique: absolute frequency, 474 THz
Absolute expanded uncertainty (k = 2, level of confidence 95%) in kHz: 24
Optical beat frequency
Internal NMI service identifier: CENAM/1
 
Laser radiations. Other stabilized laser: vacuum wavelength , 633 nm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: 2E-09
Optical beat frequency
Internal NMI service identifier: CENAM/2
 
End standards. Gauge block: central length L, 0.5 mm to 100 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[19, 0.45L], L in mm, values range from 19 nm to 49 nm
Interferometry, exact fractions
Material: steel
Internal NMI service identifier: CENAM/8
 
End standards. Gauge block: central length L, 0.5 mm to 100 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[24, 0.42L], L in mm, values range from 24 nm to 49 nm
Interferometry, exact fractions
Material: ceramic
Internal NMI service identifier: CENAM/8
 
End standards. Gauge block: central length L, 0.5 mm to 100 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[28, 0.33L], L in mm, values range from 28 nm to 44 nm
Interferometry, exact fractions
Material: tungsten carbide
Internal NMI service identifier: CENAM/8
 
End standards. Gauge block: central length L, 0.5 mm to 100 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[28, 0.39L], L in mm, values range from 28 nm to 48 nm
Interferometry, exact fractions
Material: chrome carbide
Internal NMI service identifier: CENAM/8
 
End standards. Length bar (long gauge block): central length L, 100 mm to 300 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[19, 0.45L], L in mm, values range from 49 nm to 137 nm
Interferometry, exact fractions
Material: steel
Internal NMI service identifier: CENAM/8b
 
End standards. Length bar (long gauge block): central length L, 100 mm to 300 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[24, 0.42L], L in mm, values range from 49 nm to 129 nm
Interferometry, exact fractions
Material: ceramic
Internal NMI service identifier: CENAM/8b
 
End standards. Length bar (long gauge block): central length L, 100 mm to 300 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[28, 0.33L], L in mm, values range from 44 nm to 103 nm
Interferometry, exact fractions
Material: tungsten carbide
Internal NMI service identifier: CENAM/8b
 
End standards. Length bar (long gauge block): central length L, 100 mm to 300 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[28, 0.39L], L in mm, values range from 48 nm to 121 nm
Interferometry, exact fractions
Material: chrome carbide
Internal NMI service identifier: CENAM/8b
 
End standards. Gauge block: central length L, 0.5 mm to 100 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[29, 0.94L], L in mm, values range from 29 nm to 99 nm
Mechanical comparison to gauge block
Material: steel
Internal NMI service identifier: CENAM/9
 
End standards. Length bar (long gauge block): central length L, 0.125 m to 0.25 m
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: (0.18 + 0.7L), L in m, values range from 0.27 µm to 0.36 µm
1-D stylus comparator, gauge substitution
Internal NMI service identifier: CENAM/10
 
End standards. Step gauge: face spacing L, 0.02 m to 1.2 m
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: (0.35 + 0.4L)
CMM and laser interferometer
Approved on 14 June 2004
Internal NMI service identifier: CENAM/13
 
Diameter standards. External cylinder (plug): diameter, L, 0.005 m to 0.3 m
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: (0.18 + 0.4L)
1-D stylus comparator, gauge substitution
Approved on 14 June 2004
Internal NMI service identifier: CENAM/16
 
Diameter standards. Internal cylinder (ring): diameter L, 0.005 m to 0.205 m
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: (0.18 + 0.4L)
1-D stylus comparator, gauge substitution
Maximal external size diameter: 300 mm
Approved on 14 June 2004
Internal NMI service identifier: CENAM/17
 
Diameter standards. External cylinder (pin or wire): diameter L, 0.1 mm to 5 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: (0.25 + 0.001L)
1-D stylus comparator, gauge substitution
Approved on 14 June 2004
Internal NMI service identifier: CENAM/18
 
Diameter standards. Ball or sphere: diameter L, 0.005 m to 0.065 m
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: (0.18 + 0.4L)
1-D stylus comparator, gauge substitution
Approved on 14 June 2004
Internal NMI service identifier: CENAM/19
 
Angle artefacts. Angle block: included angle, 1 ° (or ', or ") to 45 ° (or ', or ")
Absolute expanded uncertainty (k = 2, level of confidence 95%) in ": 0.3
Index table and autocollimator, full closure
Specific angle sizes: 1, 2, 3, 5, 10, 15, 20, 30, 45 in °, or ', or "
Approved on 14 June 2004
Internal NMI service identifier: CENAM/28
 
Surface texture. Groove or step-height standard: step height, H, 0.03 µm to 10 µm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: (15 + 2.7H), H in µm, ranges from 15 nm to 42 nm
2-D profile stylus instrument
Approved on 14 June 2004
Internal NMI service identifier: CENAM/32
 
Surface texture. Roughness standard: roughness parameter, 0.01 µm to 20 µm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: (10 + 18P), P in µm, ranges from 10 nm to 370 nm
2-D profile stylus instrument
Roughness parameter P: Ra, Rz, Rmax
Approved on 14 June 2004
Internal NMI service identifier: CENAM/33