Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
 KCDB home  > Free search results
The BIPM key comparison database
Refine your search
CMC AREA
CMCs Chemistry
CMCs General Physics (31)
PHYSICS
Impedance up to the MHz range
Temperature
DC voltage, current, and resistance (31)
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm) (6)
DC resistance sources: high values (higher than 1 Mohm) (6)
DC voltage sources: intermediate values (higher than 10 V to 1100 V) (4)
DC resistance sources: low values (equal or below 1 ohm) (4)
DC current sources: intermediate values (higher than 0.1 mA to 20 A) (3)
DC voltage sources: single values (2)
DC voltage sources: low values (equal or below 10 V) (2)
DC current sources: low values (equal or below 0.1 mA) (2)
DC voltage sources: low value ranges (equal or below 10 V) (1)
DC current sources: high values (higher than 20 A to 100 A) (1)
GEOGRAPHIC LOCATION
APMP (31)
Thailand (31)
Result of the search
Your query 'NIMT' produced 31 results New search
1  2

 
Thailand, NIMT (National Institute of Metrology (Thailand))
Complete CMCs in Electricity and Magnetism for Thailand (.PDF file)
DC voltage sources: low value ranges (equal or below 10 V). DC voltage source, multifunction calibrator, voltage V, 0 V to 10 V
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µV: (0.5 v + 2), v in V
Compare against DC standard
Internal NMI service identifier: NIMT/7
 
DC voltage sources: intermediate values (higher than 10 V to 1100 V). DC voltage source, multifunction calibrator, voltage V, > 10 V to 100 V
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µV: (0.5 v + 15), v in V
Compare against DC standard
Internal NMI service identifier: NIMT/8
 
DC voltage sources: intermediate values (higher than 10 V to 1100 V). DC voltage source, multifunction calibrator, voltage V, > 100 V to 1000 V
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µV: (0.8 v + 200), v in V
Compare against DC standard
Internal NMI service identifier: NIMT/9
 
DC voltage sources: single values. Solid state voltage standard, 10 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.4
Compare against DC standard
Internal NMI service identifier: NIMT/1
 
DC voltage sources: single values. Solid state voltage standard, standard cell, 1.018 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.9
Compare against DC standard
Internal NMI service identifier: NIMT/2
 
DC voltage sources: low values (equal or below 10 V). DC voltage source, multifunction calibrator, 100 mV
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 5
Compare against DC standard
Internal NMI service identifier: NIMT/3
 
DC voltage sources: low values (equal or below 10 V). DC voltage source, multifunction calibrator, 1 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.6
Compare against DC standard
Internal NMI service identifier: NIMT/4
 
DC voltage sources: intermediate values (higher than 10 V to 1100 V). DC voltage source, multifunction calibrator, 100 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.5
Compare against DC standard
Internal NMI service identifier: NIMT/5
 
DC voltage sources: intermediate values (higher than 10 V to 1100 V). DC voltage source, multifunction calibrator, 1000 V
Relative expanded uncertainty (k = 2, level of confidence 95%) in µV/V: 0.7
Compare against DC standard
Internal NMI service identifier: NIMT/6
 
DC resistance sources: low values (equal or below 1 ohm). Fixed resistor, 0.001
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.8
DCC bridge & range extender
Current: 10 A to 100 A
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/10
 
DC resistance sources: low values (equal or below 1 ohm). Fixed resistor, 0.01
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.3
DCC bridge & range extender
Current: 1 A to 10 A
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/11
 
DC resistance sources: low values (equal or below 1 ohm). Fixed resistor, 0.1
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.3
DCC bridge & range extender
Current: 0.1 A to 1 A
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/12
 
DC resistance sources: low values (equal or below 1 ohm). Fixed resistor, 1
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 1.5
DCC bridge
Current: 100 A
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/13
 
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm). Fixed resistor, 10
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 1.6
DCC bridge
Current: 30 mA
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/14
 
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm). Fixed resistor, 100
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.2
DCC bridge
Current: 10 mA
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/15
 
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm). Fixed resistor, 1 k
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.5
DCC bridge
Current: 3 mA
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/16
 
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm). Fixed resistor, 10 k
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.4
DCC bridge
Current: 1 mA
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/17
 
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm). Fixed resistor, 100 k
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 2.5
DCC bridge
Current: 0.1 mA
Oil bath temperature: 23 °C
Internal NMI service identifier: NIMT/18
 
DC resistance sources: intermediate values (higher than 1 ohm to 1 Mohm). Fixed resistor, 1 M
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 18
Wheastone bridge
Voltage: 1 V
Internal NMI service identifier: NIMT/19
 
DC resistance sources: high values (higher than 1 Mohm). Fixed resistor, 10 M
Relative expanded uncertainty (k = 2, level of confidence 95%) in µ/: 32
Wheastone bridge
Voltage: 1 V
Internal NMI service identifier: NIMT/20