Home    Key and supplementary comparisons    Calibration and Measurement Capabilities - CMCs
The BIPM key comparison database
Refine your search
CMC AREA
CMCs General Physics (14)
PHYSICS
Dimensional metrology (14)
End standards (2)
Surface texture (2)
Roundness standards (2)
Angle instruments (2)
Gear standards (2)
Angle by circle dividers (1)
Line standards (1)
Angle artefacts (1)
Straightness standards (1)
GEOGRAPHIC LOCATION
COOMET (14)
Belarus (14)
Result of the search
Your query 'Belarus' produced 14 results New search

 
Belarus, BelGIM (Belarussian State Institute for Metrology)
Complete CMCs in Length for Belarus (.PDF file)
End standards. Gauge block: central length L, 0.1 mm to 100 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[30, 0.2L], L in mm, values range from 30 nm to 36 nm
Interferometry, exact fractions
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1221
 
End standards. Long gauge block: central length L, 100 mm to 1000 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: Q[0.1, 1L], L in m, values range from 0.14 µm to 1.00 µm
Mechanical comparator to long gauge block
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1222
 
Line standards. Engineer tape: line spacing L, 0 m to 20 m
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: Q[10, 10L], L in m, values range from 10 µm to 200 µm
Comparison method
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1237
 
Angle by circle dividers. Optical polygon: face angle, 0 ° to 360 °
Absolute expanded uncertainty (k = 2, level of confidence 95%) in ": 0.14
Laser goniometer
Number of faces n: 4, 8, 10, 12, 24, 36
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1311
 
Angle instruments. Autocollimator: error of indicated angle, 0 " to 1200 "
Absolute expanded uncertainty (k = 2, level of confidence 95%) in ": 0.15
Mechanical examinator
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1331
 
Angle instruments. Electronic level: error of indicated inclination angle, 0 " to 1200 "
Absolute expanded uncertainty (k = 2, level of confidence 95%) in ": 0.15
Mechanical examinator
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1332
 
Angle artefacts. Angle block: included angle, 0 ° to 360 °
Absolute expanded uncertainty (k = 2, level of confidence 95%) in ": 0.14
Laser goniometer
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1341
 
Roundness standards. Magnification stanart (e. g. fkick standard): roundness, 0 µm to 300 µm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[28 10R], R in mm
Stylus-on-spindle roundness instrument
Diameter: 1 mm to 300 mm
Approved on 9 November 2016
Internal NMI service identifier: COO-L-BelGIM 1423
 
Roundness standards. Sphere, hemisphere: roundness, 0 nm to 2000 nm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: 2.8E+01
Stylus-on-spindle roundness instrument
Diameter: 1 mm to 100 mm
Approved on 9 November 2016
Internal NMI service identifier: COO-L-BelGIM 1423
 
Straightness standards. Straight edge: straightness, 0 µm to 50 µm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: 0.2L, L in m
Straightness standards
Length L: 0.2 m to 3.0 m
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1431
 
Surface texture. Roughness standard: average parameter, Ra, 0.02 µm to 10 µm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[1, 20Ra], Ra in µm
Stylus instrument
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1514
 
Surface texture. Roughness standard: peak parameter, Rz, 0.02 µm to 10 µm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in nm: Q[6, 30Rz], Rz in µm
Stylus instrument
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1514
 
Gear standards. Spur gear: pitch, involute, 1 mm to 10 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: 1.8
Special set
Gear diameter: 60 mm to 350 mm
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1531
 
Gear standards. Gear involute master, profile slope deviation (fHa), (fa), 37 mm to 150 mm
Absolute expanded uncertainty (k = 2, level of confidence 95%) in µm: 1.5
Special set
Approved on 17 June 2005
Internal NMI service identifier: COO-L-BelGIM 1535