– the intergovernmental organization through which Member States act together
     on matters related to measurement science and measurement standards.
Search facility:


| Site map | News | Contact us
Consultative Committee for Electricity and Magnetism (CCEM)
The Consultative Committee for Electricity (CCE) was set up in 1927. Its name was changed to Consultative Committee for Electricity and Magnetism by the CIPM in 1997.

Present activities concern practical realizations of the SI volt, ohm, ampere and watt, laboratory reference standards of the volt and the ohm based upon the Josephson and quantum-Hall effects, capacitance standards and ac/dc measurements, RF and microwave standards, and advice to the CIPM on matters related to electrical standards.
 
President:
Dr G. Rietveld
Chief Metrologist, Member of the CIPM
R&D Group
VSL B.V.
The Netherlands
 
 
Executive Secretary:
Dr M. Stock
Director of the Physical Metrology Department
Bureau International des Poids et Mesures
France
President:    Dr G. Rietveld
Chief Metrologist, Member of the CIPM
R&D Group
VSL B.V.
The Netherlands
Executive Secretary:    Dr M. Stock
Director of the Physical Metrology Department
Bureau International des Poids et Mesures
France
Member(s):  
  • Agency for Science, Technology and Research [NMC, A*STAR], Singapore
  • Centro Español de Metrología [CEM], Madrid
  • Centro Nacional de Metrología [CENAM], Querétaro
  • D.I. Mendeleyev Institute for Metrology [VNIIM], St Petersburg
  • Federal Institute of Metrology METAS [METAS], Bern-Wabern
  • Instituto Nacional de Metrologia, Qualidade e Tecnologia [INMETRO], Rio de Janeiro
  • Instituto Nacional de Tecnología Industrial [INTI], San Martín, Prov. Buenos Aires
  • Istituto Nazionale di Ricerca Metrologica [INRIM], Turin
  • Justervesenet [JV], Kjeller
  • Korea Research Institute of Standards and Science [KRISS], Daejeon
  • Laboratoire National de Métrologie et d'Essais [LNE], Paris
  • Measurement Standards Laboratory of New Zealand [MSL], Lower Hutt
  • National Institute of Metrology [NIM], Beijing
  • National Institute of Standards and Technology [NIST], Gaithersburg
  • National Measurement Institute, Australia [NMIA], Lindfield
  • National Metrology Institute of Japan, AIST [NMIJ/AIST], Tsukuba
  • National Metrology Institute of South Africa [NMISA], Pretoria
  • National Metrology Institute of Turkey [UME], Gebze-Kocaeli
  • National Physical Laboratory [NPL], Teddington
  • National Physical Laboratory of India [NPLI], New Delhi
  • National Research Council of Canada [NRC], Ottawa
  • Physikalisch-Technische Bundesanstalt [PTB], Braunschweig
  • RISE Research Institutes of Sweden AB [RISE], Borås
  • VSL B.V. [VSL], Delft
  • VTT Technical Research Centre of Finland Ltd, Centre for Metrology / Mittatekniikan keskus [MIKES], Espoo
  • Official observer(s):   
  • Czech Metrology Institute [CMI], Brno
  • Standards and Calibration Laboratory [SCL], Wanchai
  • Note:

      The Director of the BIPM is a member, ex officio, of all Consultative Committees.